Ideas for inexpensive plant labels that LAST?

zinniamamaMay 22, 2007

A goal this year is to mark all the perennials in my garden-its an acre of plants though and so far the markers I have used in the past have not worked. The writing always disappears in one season! Visitors ask "what is that?" and I can't remember and each spring I have plant amnesia and end up putting a new plant too close to a perennial that hasn't shown its head yet, so I have to get 'em marked! I like the copper style you impress with a pencil but I can't afford it from the garden supply catalogs.

Also, any Internet resources for identifying plants-some of mine are from the previous gardener and I am not certain of exact cultivars/names.



Thank you for reporting this comment. Undo

I've been using smooth plain black river rocks (like the ones used for a hot stone massage)and silver or white paint pens for the last few years. first i didn't seal them and i noticed that over time the paint slowly faded, now i do use modge podge as a sealer.

    Bookmark   May 22, 2007 at 8:31PM
Thank you for reporting this comment. Undo

I just saw that about the rocks on tv this week. They looked good. A clean rock, good paint or a paint pen and an added touch would be to spray the rock with clear varnish or a clear finish. It should brightent the rock too.

For the garden I found the wider (2") heavy plastic window blind slats and cut them 12" long. I have stapled the seed packet to the top and wrote the name and info I wanted below that. Then I made a slit with my trowel and set them in the ground at the ends of a row. So far works ok. This winter I plan on using actual paint and a stencil of sorts for the common veggie and do them as I start my trays. (I hope)

    Bookmark   May 24, 2007 at 2:37AM
Thank you for reporting this comment. Undo

Miniblinds cut up with a permanent marker. Cut them on an angle to help them get pushed into the soil, one end angles and one straight. I'm sure any blind replacement company would have a window's worth which is all you need.

    Bookmark   May 28, 2007 at 9:43PM
Thank you for reporting this comment. Undo
cs7580(zone 7 TN)

This is what I made.

Thy are made from 2x4 into pices and a wood burning tool.

    Bookmark   June 1, 2007 at 1:50AM
Thank you for reporting this comment. Undo
natalie4b(7b GA)

I use plastic "silverware". After spending a fortune on expensive markers that look good for 5 minutes, these work well and last.

    Bookmark   June 1, 2007 at 3:24PM
Thank you for reporting this comment. Undo

Never done it, but i heard mini blinds w/ pencil lasts.

    Bookmark   June 2, 2007 at 11:41AM
Thank you for reporting this comment. Undo

A tip from good ole Martha that I saw:

Use clear finger nail polish over the marker.

I found a white plastic blind that is not the mini but rather about 2" wide. I marked with a permanent marker a dozen or so 12" long pieces that I cut with a power saw. They haven't faded yet. First I push my trowel in deep where I want the marker and then insert my marker.

I also was able to staple the empty seed packet to these but the rain soaked them. I wuz gunna put them in plastic bags before stapling but .....

I could have a hundred 12" pieces from just one blind about 3' wide. Which I will continue to cut up, then write common names of veggies I will grow next year. After painting (or just a marker) each name, I will spray them with clear laquer and store till next year. I think I will make a line for a date or additional info I can pencil in?

Plan A anyway.

    Bookmark   June 4, 2007 at 7:45AM
Thank you for reporting this comment. Undo
candleberry(7 B.C.)

I use aluminum cans cut open and flattened and cut with old scissor with a point at one end to stick in the dirt or pot. Place on a piece of carpet and score the name with a nail. Hard to read unless you use some enamal paint in the scoring which lasts a season but the scored signs last forever. Works for me.
Hope that makes sense.

    Bookmark   June 4, 2007 at 6:39PM
Thank you for reporting this comment. Undo

The plastic tags will eventually crack and look like a piece of trash. The metal alternative lasts longer and has a better look.

    Bookmark   June 4, 2007 at 10:31PM
Thank you for reporting this comment. Undo

Gee what happened to the OP?

Anyway, I was thinking she could just buy sheets of copper flashing, cut them to size, write the name on with a pencil to indent (or indelible marker), glue a chopstick on the back and done.

    Bookmark   June 8, 2007 at 9:19PM
Thank you for reporting this comment. Undo

Just stopped in at Ralphs and they had packages of 20 plant identification stakes for a nickle a package on the clearance rack. I bought a lifetime supply for 50 cents.

    Bookmark   June 9, 2007 at 4:44PM
Thank you for reporting this comment. Undo

I found this on a similar thread here, so it's not my idea, but the cheapest things I've ever found are plastic flatware knives. Use a paint pen to label the handles and put the serrated end down into the soil.

It works like a dream!

    Bookmark   June 19, 2007 at 12:23AM
Thank you for reporting this comment. Undo

Used mini-blinds are ok for flats or for labeling annuals, but, being used, they are already brittle or they wouldn't have been tossed in the trash. The UV rays from a season outside in the sun is only going to make them worse. If you can get a steady supply of mi8ni blinds & keep replacing the broken labels, I guess they qualify as "permanent" labels. Years ago, I bought some very expensive zinc labels. The labels last forever, however, I found that the metal stilts rusted out completely within a year. I'm still finding the occasional zinc tag in my garden soil. Right now, I'm using wooden shims. You can get a package of 12 for .99 at HD. Not particularly cheap, and won't last forever, but they will last at least 2 years in my climate & they will be composted when they break down.

    Bookmark   June 20, 2007 at 12:08PM
Thank you for reporting this comment. Undo

I have used plastic laundry bottles etc. and cut to a point on one end to push into the ground. I used a sharpie pen to write the flower's name on the plant marker. Good way to recycle plastic and is thicker than a lot of plastics.

    Bookmark   July 13, 2007 at 2:05AM
Thank you for reporting this comment. Undo

I just did this, so don't know how long it'll last, but it looks nice:

Break damaged terra cotta pots or ceramic items into manageable sized pieces & clean.

For terra cotta, spray clear fixative on the "back" to keep water from penetrating.

(I used 99-cent clear spray paint.)

With a Sharpie or some such, write plant names on fronts of pieces.

Let dry.

Spray clear fixative to seal.

These lie on the ground with the print facing upward, so they're easy to read.

    Bookmark   July 13, 2007 at 6:01PM
Thank you for reporting this comment. Undo
WhtRos(USDA z5a IL)

I have been using mini-blinds for years and works very well for me. I have a life-time supply b/c I've been lucky enuf to find them on the curb with the trash. I cut them 8" to 10" long. I write on them with a Rub-a-Dub laundry marker that I get at Wal-Mart school supply aisle. I think a Sharpie would do just as well. I leave the top 1" to 2" blank before I start writing. I push the marker all the way into the ground leaving the top that I've left blank sticking out of the ground. That way the writing is underground and protected from the sun and won't fade. Whenever I want to see what the plant is and other info I've written, I just pull up the marker, read it and push it back down. I've been doing this for 3-4 years now and has worked like a charm. Just my 2 cents, Barbara.

    Bookmark   July 19, 2007 at 8:23PM
Thank you for reporting this comment. Undo
zengeos(5 Maine)

Go to Home Depot or Lowes and ask the people in the blinds department to save the vertical blind louver leftovers. HD and Lowes just throw the louvers away and it's a shame. I never have a problem getting louvers. They'll give you the leftovers without a problem.

Typically you can get 3 1/2" wide x 6-18" long pieces of louver. I cut them in half lengthwise, and then cut at an angle. I find them MUCH better than miniblind slats as the blind slats are flimsier and too small, IMO.

    Bookmark   January 14, 2008 at 11:29AM
Thank you for reporting this comment. Undo
zengeos(5 Maine)

The PVC blind slats (2" faux wood) are ok to use as markers, BUT much more difficult to cut into the right size pieces as they are too thick. Still, if you have a table saw or chop saw, I guess you could cut them in a way that would work for plant labels. Get the smooth ones, though, not the textureds as the textured ones are harder to write on.

    Bookmark   January 14, 2008 at 11:33AM
Thank you for reporting this comment. Undo

I like your idea of the terra cotta pots, I have heard that the blinds crack and break after a time, I use copper or I have used some wooden popsicle sticks, but I find sometimes it's better to invest a little now to save headaches later.

    Bookmark   January 18, 2008 at 7:44AM
Thank you for reporting this comment. Undo

Use the mini-blinds. Go to your local thrift store and buy one mini-blind for about $1.00-$2.00. Go to you local discount department store and in the art and school supply section buy a box of China Markers (grease pencils). The tags will last forever and the grease pencil markings will last just as long. When you need to remove and re-use the tag, take a piece of newspaper and some water (spit will do as well) to wipe off the old name. While at the store, buy a scissors action one hole punch like the one used to punch tickets and a roll of the green coated twist tie wire. Punch holes in one end of the plastic tag and put a piece of twist tie material through it. These make great tie-on tags. During the winter when it is too cold to work outside I make tags by punching the holes and threading the wire. I put them in a plastic bag with a marker or in a large coffee can. They are stored on the potting table so I know where to find them. You can use a Sharpie magic marker but they will fade before the grease pencil.

    Bookmark   January 20, 2008 at 6:36PM
Thank you for reporting this comment. Undo
zengeos(5 Maine)

Prim, why buy a cheap miniblind when you can get the leftover vertical louvers from HD and Lowes? They also cut easily with regular shears, but the pvc is about 3x thicker, so nowhere near as flimsy or prone to cracking.

IMO, letting HD and Lowes just toss the leftover louvers away is a waste of resources, when frugal gardeners can make excellent use of them.

BTW, for you fruit tree lovers, who paint your tree trunks to prevent borers, HD is coming out with a new 0 VOC paint and primer. not cheap, but much more enviro friendly.

    Bookmark   January 21, 2008 at 11:32AM
Thank you for reporting this comment. Undo

Zengeos, How do you get the left-overs? Do you ask the people working there? I keep hearing people on this forum saying that they barter for most things they purchase from Lowes,and they never pay the price that is being asked. I don't see how they could make money that way. I have never had the courage to ask, although I got some great deals there last fall, carted out 2 wagons overflowing with perennials. Maybe I should have.
I enjoy this forum, thank you.

    Bookmark   January 21, 2008 at 10:16PM
Thank you for reporting this comment. Undo

i know what your saying (primgal) i never asked about the bucket at the deli in walmart til this weekend, but i finally did, and they did really give us some, i was like ya baby!! LOL and my mom said sams club does too, great for winter sowing!! and other stuff too!!

    Bookmark   February 5, 2008 at 10:30PM
Thank you for reporting this comment. Undo

Well, I guess I'll have to try asking them next time I'm there, it just feels awkward to me.
I just took a class on w/s, I was thrilled to know I could do this. Winters are so long here, and I just get really stir crazy, at least I have something to do and to look foward too. I have alot to do, but this is something I really love doing.

    Bookmark   February 5, 2008 at 11:14PM
Thank you for reporting this comment. Undo

I got a bunch of cut off plexi-glass from a frame shop and cut it into plant tags and scratched the name of the plant into it. They look fine, but i dont really know how well they will last.

    Bookmark   February 6, 2008 at 12:27PM
Thank you for reporting this comment. Undo
zengeos(5 Maine)

Prim, if your Home dfepot is relatively busy, they should have a reasonable supply of louvers being trimmed down. longer leftovers are more difficult to come by, but believe me, they dO get them. Just go in one day and ask them to save a couple packs of longer cut offs from the vertical louvers they cut. They should be more than happy to give them to you. I got 20 packs once, which i shared with my sister. I just went back to my depot and asked them to set a couple aside for me to pick up. They'll likely hold them for a couple days, then toss them, so check a couple times weekly.

MUch easier to deal with than faux blind slats, though they may not look quite so nice as I tend to cut them in 1/2 (1 1/2-2" wide stakes that way.

    Bookmark   February 9, 2008 at 10:42AM
Thank you for reporting this comment. Undo
zengeos(5 Maine)

Prim, if your local HD associate is not willing to give the leftovers away at your request to you, please let me know....

My store makes a point of offering leftovers to the customers, letting them know what they might be used for...roller shade ends, when over 8" wide make great little *scrolls8 for kids to color on and do their artwork on. The louvers are great for plant stakes, as I mentioned.

    Bookmark   February 9, 2008 at 10:46AM
Thank you for reporting this comment. Undo

Zengeos, thanks for the tip. I will do that.

    Bookmark   February 10, 2008 at 8:03AM
Thank you for reporting this comment. Undo

When a friend asked about used mini-blinds (about 3 years ago)at a charity shop, she was told they could not accept them to resell as there was evidence of toxicity...esp those made in China. Did see a related article in a magazine. Imagine the materials have changed.

Those ends from the vertical blinds are great for many uses...esp annuals.

For perennials and woody plants/grafts I prefer copper sheeting-carefully cut and attached to bush/tree, or nearby stake with a strand of # 10-14 g copper wire. I saved all the copper wire left from electrical work. I use an engraving tool on the copper sheeting -listing the genus species, variety and the nursery/source. Have also used leftover soffit material (aluminum) for the tags-but prefer the copper. My oldest homemade copper tags are 20+years old, still legible with lovely patina.

    Bookmark   February 12, 2008 at 1:25PM
Thank you for reporting this comment. Undo
bencjedi(6 - Central Kentucky)

The spoons that come in the McDonald's McFlurries® seem to work well as plant labels. I just took a Sharpie, wrote on one side and stabbed the spoon in the ground. The handle of the spoon is very durable, the tip is flimsy, but once you get it pushed down deep enough, it stays put.

    Bookmark   March 6, 2008 at 2:22AM
Thank you for reporting this comment. Undo

we went to a second hand store and bought a LONG one of a mini blind, and it was really cheap, i only did that cuz it was hubby's friend, and we've been using them. and i cut them in half. lenghth wise too. so i have soooo many!! i just don't like that they are the kinda almost metal one's. so i know they will last a long time!! LOL

    Bookmark   March 7, 2008 at 11:42PM
Thank you for reporting this comment. Undo

I used the plastic from yogurt, margarine tub, etc. lids and sides. I cut them into vaguely plant-tag shape, then poke two holes in them, and then thread a bamboo skewer thru those holes, then write on it in permanent Sharpie ink.

    Bookmark   March 8, 2008 at 1:36AM
Thank you for reporting this comment. Undo
glad2garden(5, Chicopee, Mass)

I also use a grease pencil/china marker as someone else suggested. I get the leftover cutoff blinds at lowes. Works great for me.

    Bookmark   March 13, 2008 at 6:32PM
Thank you for reporting this comment. Undo
caavonldy(8/9 N CA)

I use the fine-tipped paint pens that I buy in the craft store. They last forever. It won't fade from the sun.

    Bookmark   March 21, 2008 at 7:56PM
Thank you for reporting this comment. Undo

If you look in the door and window dept of a real lumber yard, they should stock cedar door shims. They are about 1' long and should last just about forever. Cost here about $4 for 100.


    Bookmark   April 10, 2008 at 2:17PM
Thank you for reporting this comment. Undo

i brought up this in the ws forum, and alot of the people like the elmers markers!! which i have found at micheals hobby store, so i imagine you can at hobby lobby. and china markers. those two have lasted the longest they say, then the paint markers. the elmers markers are 2-3 dollars i think. i didn't get to get one yet **boo hoo** but that's what i have so far. i got the 99 cent one, so i'm sure its gonna fade now that its outside!! errrrr!!! i din't think about it. but i just wanted something and not a sharpie, cuz i seen what that did, its all gone!! and it was outside 1 month! that was it. so now i don't know what i winter sowed. how frusterating, wished i had asked that BEFOR i planted the stuff!! LOL

    Bookmark   April 11, 2008 at 11:31PM
Thank you for reporting this comment. Undo

I have tried the metal can cut up into rectangles and used nail polish to write the name and it worked pretty well. Also, you can use the round metal thingy at the end/bottom of juice cans - use a marking pen (or bright red nailpolish -- haha) and then staple this to a popsicle stick or wooden shim. And, you don't have to worry about cutting your fingers on a cut-up can. Kinda cute, too!

I have not tried the rocks, but also like this idea. I have tried the mini blinds and they worked well for plantings in pots, but seem to lose them out in the gardening area.

    Bookmark   April 15, 2008 at 6:31PM
Thank you for reporting this comment. Undo

Those of you in farm country will understand this...use the tags and tag marker pens that are used on the cattle's ears. That ink won't be leaving soon!

    Bookmark   April 16, 2008 at 11:59AM
Thank you for reporting this comment. Undo

Here's one for you...

When I had my vertical blinds cut to length there was about 8-12" of "scrap" that the guy was going to toss out. I quickly snatched those up and have been using them ever since. Cut horizontally they make great little 5" labels for seed-starters indoors and cut vertically they make great 8-12" labels for outdoor gardens.

So far, after a season's worth of weathering outdoors, the sharpie ink has only slightly faded and the plastic seems eternal...

I'm sure you could probably even go up to the local Home Depot or Lowes and scout out their blinds department and rummage through their scraps freely if you asked them. They'd just be landfilling them anyways.

    Bookmark   April 17, 2008 at 10:50AM
Thank you for reporting this comment. Undo

The best thing I've found to use is cut up pieces of vinyl siding written on with china marker/grease pencil. The vinyl siding stays flexible, lasts forever, can be cut to any size you need, etc. Call a company that does siding and they will welcome the chance to get rid of their scraps. The only catch is the pencil will fade in several years and will need to be renewed. I also use smaller pieces of siding written on with #1 pencil to mark cups that I've planted my seeds in. At the end of the seedling season I can erase and reuse next season.

    Bookmark   April 19, 2008 at 9:34AM
Thank you for reporting this comment. Undo

While the reusing of material that would otherwise go to the dumpster is commendable, it is a good idea to inform ourselves about plastics, and how vinyl releases toxics when exposed to sunlight. Some miniblinds are vinyl. Plastic silverware is polistyrene, which also releases toxins when in contact to heat. I personally don't like the trash look that plastic has, but there are many other reasons you may want to avoid it. I have used bamboo year round around the garden for 8 years now, and it is still there. It rots slowly and mostly in the areas when it touches the ground. I have also used old wire hangers and copper flashing which I found at HD. Please keep in mind that plastic eroding in the soil is not a good idea, specially PVC or styrofoam, as they can alter the chemistry of microorganisms. But don't take my word for it, just do a search and make sure to include the word "toxic". Yes, plastics including PVC and vinyl are cheap, but not in the long run...

    Bookmark   April 20, 2008 at 9:21AM
Thank you for reporting this comment. Undo
kandm(8b coastal alabama)

Type up a sheet with the plant names, print it and take it to FedexKinkos to be laminated. They charge 2 bucks to laminate an 8 by 11" sheet. Cut out the names and tape them to sticks. Or you could buy some clear contact paper, the kind you use to cover textbooks, and use cut up index cards.

    Bookmark   April 20, 2008 at 7:17PM
Thank you for reporting this comment. Undo

I use the smooth metal can lids found on frozen juices and then use an engraver to label the name of the plant, punch a hole and then hang from a metal skewer which I bend to hold the lid. On the downside, some of the metal lids will rust from time to time -- thought I might try spraying with a sealer to see if this would keep the lid from rusting. I was able to buy at season's end a large quantity of metal skewers, but could use as mentioned in a previous posting, bamboo stakes and wire the lid to it.
I have a problem with "critters" stealing my plant stakes, so I like to secure them deep in the ground and the plant lid is sizable enough to still be able to read. Placing the label in the ground at the 3:00 o'clock position to the plant helps me locate when the plants become taller.
Good luck!

    Bookmark   April 24, 2008 at 11:02PM
Thank you for reporting this comment. Undo

This isn't as frugal as most of the choices here, but my wife and I just finished a few and I thought we'd show them off. We buy cheap plant tags where we find them and decorate them with acrylic paints, then apply a few layers of sealer or varnish. It helps me get over my pre-planting obsession - letting me work with the garden even when the garden isn't workable, and giving us an excuse to play with paint. :) It also makes the garden a little more fun for visitors, and sometimes guests may join in the fun, and make a few themselves.

    Bookmark   May 3, 2008 at 12:11PM
Thank you for reporting this comment. Undo

Nice plant markers queuetue!

Just found this thread and forum and think I qualify for frugal gardening as well a lot of other "frugal" topics! I've tried different methods of marking plants but was never too pleased with them until last year when I used old china and porcelain plates. I love yard saling and have long collected plates which are very inexpensive at YS's. Last spring I used a porcelain marker pen (bot at Michaels) and wrote plant names on plates. Then baked them per instructions and buried them in front of the appropriate plant about 1/3 in the ground. They have a cottagey look, are easy to read, and decorative. I tried to match the color of the plate design to the plant flower but that wasn't always possible.

This type of marker is breakable but unless I hit them with my shovel they'll be OK. I did take them in last fall, washed, and put away, but I think I know where most plants are so I can find them to label again. In a warmer climate they could stay out all year.

I'd post a pic but that seems to be more complicated on this forum.

Anyhow hope this may help other frugal garden decorators!

    Bookmark   May 20, 2008 at 3:05PM
Thank you for reporting this comment. Undo

I have over 1000 plants to mark and therefore look for markers that are easy to prepare and economical. My experience with plant labels that work is as follows:

The first is "Inpress-o-tags" by Amekron. These are 1" x 3¼" aluminum tags that can be impressed with a pencil or pen on both sides and have 2 small holes for a aluminum wire. These are a nice size, easy to write on and hold up well in Wisconsin winters. However, they are attractive to varmints and some birds and occasionally are carried off. Also, for non-woody plants they require a stake. I continue to use these for woody plants.

Next I used pieces of venetian blinds. I found a dusty rose color which shows up but doesn't standout like the aluminum tags. I tried various inks and all suffered from uv rays. I now use pencil with a coating of clear finger nail polish. This has held up well for 2 Wisconsin winters. However, the blinds tend to be a bit flimsy and difficult to push into dry or heavy ground.

I am now planning to try plastic knives with the pencil and clear nail polish. They are easier to insert in the ground. The writing surface is quite small so I will be limited to the plant name and a reference number to my plant database. I will update in a couple of years when I have results of this test.

    Bookmark   June 24, 2008 at 5:15PM
Thank you for reporting this comment. Undo

Little late to this party but being a geek I use old CD-ROM disks. Just mark them up with a permanent marker and stick them in the ground. A little spray sealer might make the print last longer. I have had no problem with a permanent marker lasting 2-3 seasons.

Anybody who has ever been targeted by AOL has plenty of free disks to use!

    Bookmark   August 19, 2008 at 9:46PM
Thank you for reporting this comment. Undo

Wow, I hadn't thought of old CD's! I hang old CD's in my fruit trees with fishing line to scare away the birds.

For marking, if you use a china marker, you don't have to spray on any sealer. They are also called "grease pencils". You can get them at office supply stores for a dollar or two and they last a long time. They don't fade. They might wipe off if they're on something as slick as a CD, though. When I mark my plastic freezer container lids with them, I have to use cleanser to get the marking cleaned off, so it lasts pretty well on those.

I was thinking about this thread the other day when I noticed a clothespin still attached to one of my wire tomato cages that is around a pepper plant. I had used clothespins to attach a cloth "shield" around the pepper plant one day last spring when the cold wind was just beating the daylights out of everything.

But anyway, I noticed this year that my plant markers got kind of hard to find after the tomato plants got big. I was having to reach down under the plant like I was trying to get an egg out from under a chicken. I don't know about the rest of you, but tomato vines make me itchy all day, and they get green stuff on my clothes. I thought about maybe marking on a clothespin (the kind with the spring) and attaching that to the wire cage.

Glad you resurrected this thread, John, you must've been reading my mind! --Ilene

    Bookmark   August 24, 2008 at 3:18PM
Thank you for reporting this comment. Undo
angelady777 (was angelady on GW) - Zone 6(6)

That's hilarious as I was just thinking about buying a bag of the old-fashioned wood clothespins and woodburning the name in as a prior poster brought up. You could just clip the clothespin anywhere you wanted. Some clips would be on the top of stakes in the ground by their plant, others on cages and trellises....

I tried making the homemade aluminum foil labels and they do work well, but they are time-consuming. But, I guess woodburning will be time-consuming as well! LOL


    Bookmark   August 27, 2008 at 2:21AM
Thank you for reporting this comment. Undo

How about getting one of those label makers that people use to mark things at the office? The version I'm thinking of comes with a heavy plastic tape that is sticky on the back. The label maker has a kind of a dial that you pick the letters, one at a time and then squeeze the trigger. It impresses the letter into the tape each time. I don't know how well the tape would stick to something, over time, in the hot sun. You could stick it to a small piece of thin wood, kind of like paneling, and make a "luggage tag", or you could stick it onto one of those clothespins.

    Bookmark   August 28, 2008 at 10:11AM
Thank you for reporting this comment. Undo
angelady777 (was angelady on GW) - Zone 6(6)

Hmmmm... I'm gonna have to try this last idea. I do have a label maker, though I've never used it. I'm too busy right now to give it a whirl, but I will try to remember to come back and post how I feel about it after I've tried it. That certainly would take care of doing several very quickly.


    Bookmark   September 1, 2008 at 3:49AM
Thank you for reporting this comment. Undo
joyful_garden(9b-St. Cloud)

If you were going to use the label maker, I would suggest stapling it instead of sticking it. I have one of those and it sticks ok but I can't imagine it holding up in the sun. Over time the color on the plastic label will fade but I imagine it would las a season or two depending on where you are. I'm in Florida so I know it would fade after the first few months with our 10 hours of hot sun per day.

    Bookmark   September 1, 2008 at 9:19AM
Thank you for reporting this comment. Undo
concretenprimroses(4B NH)

Clothes pins have so many uses, and the new ones aren't made really well, so its worth picking up old heavy duty ones at yard sales when ever you see them, in my opinion. Love the idea of using them as plant labels. Some of the old ones actually have pretty shapes and would add a rustic antique feel to the flower garden.

    Bookmark   September 1, 2008 at 9:51AM
Thank you for reporting this comment. Undo
angelady777 (was angelady on GW) - Zone 6(6)

Absolutely! I totally agree about the rustic, country look! I'm also in Texas so heat is an issue for me as mentioned by Joyful. You could clip the side with the label facing toward the plant (away from the sun), unclip it to double-check what it is when needed, then put it back... just a thought to make them last longer before fading...


    Bookmark   October 11, 2008 at 11:48PM
Thank you for reporting this comment. Undo
macthayer(z9a NV)

I know this answer has nothing to do with cheap labels, but it is a solution to your problem of identifying plants. I happen to have two "puppies" who love to chew up the markers in my gardens. Like Barbara (whtros), I push my markers underground so that only about 1/2" is showing, although I use commercially produced plastic markers, not mini-blinds. I picked up a ton of these markers for a song on eBay. After I write on a permanent marker, I also spray them with varnish. Because they are underground, and protected by the varnish, I haven't had any problem with fading (AND my dogs can't get to them! A big plus!) But before I thought of this method, I had a problem because one of the dogs snatched a tag off a daylily I was trying to hybridize, and there I was with a ripe seed pod and no idea who the parent plant was! I was just using 'open pollination' at the time, so I didn't have the pollen plant on any of them, which made it even more important to know the pod parent. So I had to dig up the parent plant and check the root tag (all my daylilies have root tags, just in case I lose the above ground tag). So what I did then was to sketch out all of my gardens, and then carefully fill in all of the names of all of the plants. Now I can tell at a glance what is planted where. This is especially nice when giving tours because I can carry my diagrams with me (they're in a notebook), and if someone asks about a plant, I have that information right at my fingertips. I don't even need to check the tag! I have found this to be very convenient. And since I do the diagrams in pencil, if I move or change a plant, it's easy to change the diagram. This year, I rearranged two of the beds, and just made new diagrams. These diagrams sure have saved me a lot of headaches over the last couple of years! I only wish I'd thought of it sooner! Anyway, just a thought if you're interested in an approach such as this. MacThayer

    Bookmark   October 20, 2008 at 1:19AM
Thank you for reporting this comment. Undo
tomatobob_va7(z7 VA)

For staked plants and perennials I use plastic transparency sheets from a school or office supply store. I type up a few pages of the tomato varieties I'm planting that season, using a fairly large type size, say 18 or 24. Do this in two columns to get more out of a sheet. Then print the pages on a laser printer. Next take a strip of duct tape and stick it to the transparency so that it wraps around the margin, not covering your printing. Now punch a hole through duct tape and transparency. A twist tie will fasten your tag to a stake or loosely to a branch. These last two or three seasons outside in my region (Virginia).

    Bookmark   October 20, 2008 at 3:48AM
Thank you for reporting this comment. Undo
kyrsyan(z7 AL)

Ok, I saw this thread and had to share. I don't know where I got this idea from but it has proved to be wonderful. First I use metal window blinds cut to my preferred size, but with this idea "the stake" can be whatever you want it to be. Then use aluminum tape. Put a piece where you would write the name. Then using a pen or pencil, write the name in the tape. It "engraves" it. I've used this method for years, and while the tape might get other scratches over time, I can always read the original name. And when I need to reuse a marker, I just put a new piece of tape on. You can find aluminum tape at your hardware store with the tapes or in the heating supply section. One roll goes a loooonnngg ways.

    Bookmark   December 22, 2008 at 10:47AM
Thank you for reporting this comment. Undo

Here's what I'm now using for plant labels:

I cut off lengths of 1/2" or 3/4" pvc pipe (left overs from contruction job)about 12" long, wrote the name of the veggie along the side with a permanent ink marker, then varnished over it. It has been on for 3 years and no fading. They are large enough, and tall enough that I don't loose them. They don't look that great - but could be painted better in the future.

I tried the mini blinds, but didn't like them.

I had a piece of Lucabond - plastic sandwiched with aluminum. Cut it into strips w/a bandsaw. Used a permenant ink marker to write the veggie name, and varnished over it. These made great permanent markers for my seedlings, too.

My winter project was to find rocks to paint for lables. I'm trying that this year.


    Bookmark   January 26, 2009 at 10:02AM
Thank you for reporting this comment. Undo

Thanks for the aluminum can tip! I love free!
You might want to round off the edges as they are sharp, otherwise it works great:

    Bookmark   August 8, 2009 at 12:12PM
Thank you for reporting this comment. Undo
Jshwartzer(Zone 5)

I forget where I read the idea, but for potted plants, WHITE electrical tape makes a good label you can stick onto a pot, then peel & re-stick later; the fine tipped paint pen is better than Sharpies which tend to fade over time...

    Bookmark   November 26, 2012 at 8:20AM
Thank you for reporting this comment. Undo

I use left over touch up car paint on a rock.

    Bookmark   December 20, 2012 at 9:54AM
Sign Up to comment
More Discussions
Cheap grow lamps/seed lamps/seed cultivation methods
I am ready to start my own plants from seeds. But I...
Homemade Insecticidal Soap Formula
Today I visited John Starnes' blog: Rosegasms And I...
Where Can You Get Free 55 Gallon Plastic Barrels?
Where can you get free 55 gallon plastic barrels? I...
Mycorrhizal Fungi
Been searching google and youtube endlessly for info...
Need inexpensive front yard ideas
We are in Southern California and we have a font yard...
© 2015 Houzz Inc. Houzz® The new way to design your home™