How to attach plastic to PVC hoophouse? I'm stymied & desperate!

PlanterRic(8)November 17, 2005

I put up the greenhouse -- admittedly temporary -- but, tape, even duct tape, refused to stick in freezing temperatures. Out of desperation, I did some stapling, but I know this is not a decent or lasting solution. I need to get the plastic up before I could get clips from online sources, and I can't really afford those anyway.

Has anyone tried to make thier own clips from slightly larger diameter pvc cut into short lengths and with a lengthwise section cut out?

Other solutions? There must be something obvious I'm missing. Last night was our first freeze. I think I squeaked by, but I need to do something more durable today!!!!!

Thank you for reporting this comment. Undo
BigDogues(z4 NH)

I often hear of people making clips from black poly pipe. Cut each piece about 8" long and make a slit along it's length.

    Bookmark   November 17, 2005 at 10:05AM
Thank you for reporting this comment. Undo

You can purchase plastic clips used for rollup sides to clip plastic onto rollup pipe, but because the clips pretty much surround the pipe, I doubt they will work for you. It appears that you want to keep the structure very simple but I'd suggest using a "C" clamp to attach(screw) the PVC to a 2x4" (preferably treated) wood base. Then you can attach the plastic by a number of conventional ways; eg.: 1. wire-lock 2. Spaced-overlapping wooden strips 3. Stapled batten tape over plastic.

A cheap alternative is to simply burry the plastic along the sides by shoveling soil over it along the entire side. Clipping on the end arches is then still an option or you could close the ends by tying the plastic(extending at ~2times the height beyond each end) in a bunch and securing it at the ground with a heavy stake. I usually do this with remay fabric over a canopy frame and it works pretty well. I should mention that I purchased plastic clips for holding tarp onto 1" canopy frame this fall and I can't recommend them. They are very expensive for a plastic clip; they have a tendency to break when stretched over the pipe and they weaken the material even to the extent of tearing it.

    Bookmark   November 17, 2005 at 11:52AM
Thank you for reporting this comment. Undo

BigDogue -- Thank you so much for the tip about the black poly pipe. I have some of it lying around, so I can try this now. I'll describe the problem a little more clearly below and will really appreciate any other input or suggestions you have.

bmoser -- I looked up wire-lock systems, and they seem perfect for securing plastic sheeting to a wood or metal pipe base, but this is a temporary structure that I only need for this winter. This property is being sold and the new owners are allowing me the space for this greenhouse until I established at a permanent location for my rapidly growing (but still in start-up) rare plants business.

The sale of the property, including the good greenhouses I've been using, was unexpected, so I am scrambling to save my plants.

For now, I have driven 6' rebar a foot or more into the ground, spaced 4' apart, and slid sun-resistant pvc conduit over the rebar to make the arches. There is one central purlin. There isn't time (with the first freezes setting in) to build wooden ends, so those are also stretched plastic.

I have bought 6 mil. plastic sheeting in 10'x 25' rolls. The arches are exactly 25', so there is no extra for burying. I'm thinking I'll staple the bottom to scrap lumber with batting strips.

HERE'S MY REAL PROBLEM: (1) I need to secure sheeting to the ends (which, in this location will have to take a good bit of wind). I will try the black poly pipe clips BD suggested, and I'm open to other ideas.

(2) Then I need to secure the first sheet to the end arch. Again, the black poly pipe might work.

(3) I need to connect the successive plastic sheets together over the arches every 10 feet. I donÂt see how the poly pipe clips would work here. Right now, all I can come up with is pulling the overlaping sheets together on the inside, folding it over and stapling it in a fold of denser plastic (milk carton) as batting.

(4) IÂm not sure how IÂll manage an entrance on the other end  maybe just overlapping flaps.

(5) For heat, I have a 2Â tall, forced-air, electric heater and a portable, electric, oil-filled radiator. I can put a box fan behind the radiator to circulate the heated air. IÂm concerned that plain radiant heat would go straight up and dissipate through the cold plastic. Any input on these ideas?

IÂm putting down black ground cloth, which might help keep the ground warm. Is it better to put plants directly on the ground, so theyÂd get ground warmth, or to put them on pallets and benches to benefit from warmer air circulating above the ground?

IÂll be grateful for any helpful ideas.

    Bookmark   November 17, 2005 at 6:46PM
Thank you for reporting this comment. Undo


    Bookmark   November 18, 2005 at 5:03AM
Thank you for reporting this comment. Undo

These snap clamps work like a charm and A to Z Supply is super easy to deal with. I have ordered from them a number of times.

Here is a link that might be useful: Snap Clamps

    Bookmark   November 20, 2005 at 6:03PM
Thank you for reporting this comment. Undo
bubbatex0(8 TX)

I used the black poly pipe from a roll I cut into 4" strips. Hard to get on but they hold well. On the spots where you need extra holding power just run a small screw into the PVC.

    Bookmark   January 25, 2006 at 2:28PM
Thank you for reporting this comment. Undo

OMG! Thank you for the Pic! I have been struggling with the same question, and searching for answers!

    Bookmark   March 15, 2011 at 9:31PM
Thank you for reporting this comment. Undo

The other possibility if you can't get the right poly pipe is to use Bulldog clips. If you are using 3/4" PVC, the large Bulldog clip, which you can get from Staples or any office supply store, will hold these too.

    Bookmark   April 11, 2011 at 4:01PM
Thank you for reporting this comment. Undo

I put hoops over my raised beds. I found Snap Clamps at Green House Mega Store work well with 3/4" PVC.. I bought the 48" length and cut them 4" each. They fit tight. Instead of using spring clips on the end I used a pipe clamp to attach a 12" piece of PVC then folded the ends in and attached them to the pipe with another piece of the snap clamps.. It works great.

Here is a link that might be useful: GreenHouseMegaStore Snap Clamps

    Bookmark   October 23, 2013 at 6:55PM
Sign Up to comment
More Discussions
Greenhouse plastic problem
I built a 12'x 28' greenhouse a few years ago.It is...
temp in your greenhouse, and temp/weather outside, right now?
I'm curious as to what kind of passive solar gain you...
Suggestions for shade cloth for HF 10x12 GH
What do you recommend for use with GH having veg and/flowers?...
Subterranean Heating/Cooling System - Continued
This is to continue the discussion from the previous...
Avocados for zone 3?
Please see below for the question.
Sponsored Products
Victorian Black 15" High Tri-Mount Warm LED Solar Light
Lamps Plus
Rocker Lounge Chair in Green
$160.00 | LexMod
LaMont Home Caprine Black Placemat (Set of 6)
Naples Satin Nickel Five-Light Pendant with 11-Foot Silver Cord with Clear Glass
22" Egyptian Marble Bathroom sink + faucet hole - TORRENCE GALALA
Hudson Valley Lighting | Orchard Park 3 Light Island Pendant
Oh, Deer Bottle Holder
$74.99 | Dot & Bo
Lizz Chair by Kartell
$350.00 | Lumens
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™