bamboo ladle?

MrNorth4(Sweden ZOne 1)June 15, 2005

Does anyone know how to make a bamboo ladle like this:

http://www.japanesegifts.com/images/ladel6.jpg

I find it impossible to find anyone to buy at a reasonable cost (not more than 15 euros).. So I was thinking about making one by myself. So if anyone has ideas on how to make them, then im all ears ;)

kind regards

henrik - trying to bring the missing piece to the tsukubai

Thank you for reporting this comment. Undo
DonPylant(z8TX)

Hida Tool (hidatool.com) sells a wooden bowled ladle for a very reasonable price. You may need to call them as I don't know if they offer it on line. The veneer and bamboo ladles are hard to make, don't last long outdoors, and are indeed expensive.

    Bookmark   June 15, 2005 at 10:06AM
Thank you for reporting this comment. Undo
MrNorth4(Sweden ZOne 1)

Okay, thanks :( If I had bamboo thick enough, I should try and make one myself ;)

/henrik

    Bookmark   June 17, 2005 at 12:39PM
Thank you for reporting this comment. Undo
george_in_the_uk(UK)

hi Henrik,
I make my own,they are very easy to make if you have the right size bamboo, I maybe lucky but I can buy plenty here in the UK in fact I have just bought two 6' pieces today.
take a look at this link it shows one that I made recently. http://koi-z-are-us.20m.com/shishi.htm
George.

Here is a link that might be useful: George's Japanese Garden

    Bookmark   June 17, 2005 at 2:55PM
Thank you for reporting this comment. Undo
mastergarden

You can get a decent priced bamboo ladle at http://www.mastergardenproducts.com/bambooladle.htm

Here is a link that might be useful: bamboo ladle

    Bookmark   November 19, 2008 at 3:45PM
Thank you for reporting this comment. Undo
yama(7b Ga)

Hi Henric
Many of us move to myjapanesegarden.org. Visit to the web site.
We use Madake, hachiku, and moso to make ladle. Moso bamboo is ofeten used to make ladle because of thickness of wall. After few months to few years it will split. You can treat mamboo with PEG wich prevent spliting. When you drill hole,dril strait ,after tip of dril get into bamboo wall, then chenge angle. if you try to dril angle first, tip of dril bit will slip off. you might want to use masking tape also. to make handle fit, you need to use knif to adjust hole to make handle fit.( or handle)

Many peoples like you.if you visit to myjapanesegarden.org
Edzard will help you gradly.
yama

    Bookmark   November 25, 2008 at 11:38PM
Sign Up to comment
More Discussions
Pine Cloud pruning advice
I need some advice on pruning this pine. Here is a...
diyspa
Young Japanese Maple Trunk Rot?
Hi Guys Spring has finally hit Australia and our 2...
AWBL
Rock placement
Here are 2 groupings I've done so far. Looking for...
waterbug_guy
Are Japanese Maples Deer Resistant?
I have several recently purchased Japanese Maples and...
Giacamo
japanese ilex
I'm still learning about bonsai and i was wondering...
fallennobody
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™