Sprayer schedule?

eviloatmealNovember 25, 2009

Okay, so I abandoned the fogger...FOR NOW. I will come back to that when I have more free time. My plants needed to be fed because they were just ready to be moved to net pots, I digress.

How long do I need to spray the roots with nutes? Is there a schedule I should be following? I heard 1 minute on, 5 minutes off, all day (from another site). Anyone run the pump all day?

My system is 2 capped fence posts, with a 1/2" line run into 1 end spraying between the net pots (3"). It drains on the same end back into the reservoir.

Thank you for reporting this comment. Undo
grizzman

On my system (low pressure sprayer), I was running something like 30 min. on, 45-60 min off from about 6 am to 8 pm, then on for 30 min. one time at about 2am. This was a function of available timer settings. Anyway, It's always worked well for me.
I have read on other threads here, that cycling a pump that much (1on/5off) may dramatically shorten its life, so do some research before committing to that kind of frequency.

    Bookmark   November 25, 2009 at 10:52AM
Thank you for reporting this comment. Undo
eviloatmeal

yeah, thats what I'm worried about (pump life).

    Bookmark   November 25, 2009 at 11:17AM
Thank you for reporting this comment. Undo
hex2006

You can use a short misting cycle for low pressure aero and still have the pump running 24/7 :)
Add a tee to the pump outlet, put a normally open solenoid on one side of the tee (leading back to the res) and the line to your sprayers on the other side of the tee. Connect the cycle timer to the n/o solenoid.
When the timer is "off" the solenoid will be open, your sprayer line represents a much high resistance to flow so the pump fires straight into the res (aerating the nutes at the same time).
When the timer is "on", the solenoid is closed and the line to your sprayers will pressurize ;)
You could use a cheaper normally closed solenoid but as it would be "on" a lot more than "off" its life expectancy would be a lot less.

    Bookmark   November 26, 2009 at 9:03AM
Thank you for reporting this comment. Undo
eviloatmeal

Any examples of said solenoid valves? I can't seem to find any.

    Bookmark   November 30, 2009 at 6:01PM
Thank you for reporting this comment. Undo
grizzman

you can find solenoids at Lowe's in the automatic lawn watering area.
Finding a DC timer to run them may take a little more effort.
Also not sure if they're normally on or off.

    Bookmark   November 30, 2009 at 7:23PM
Thank you for reporting this comment. Undo
hex2006

Hi Grizzman
You wouldn`t need a dc timer. Use a standard cycle timer to fire up the mains side of the low voltage adapter/power supply thats feeding the solenoid. I`m the other side of the pond so i can`t help with a supplier but you shouldn`t have any trouble locating a n/o solenoid online.

I use the 12vdc pushfit type (#1175BC)listed in this pdf,

http://www.solenoidvalvesuk.com/catalogue/filecatalog/Page99.pdf

The optional N/O coil is more expensive.I know it doesn`t help you much but at least you`ll have a better idea what to look for.

    Bookmark   November 30, 2009 at 10:29PM
Thank you for reporting this comment. Undo
eviloatmeal

Hex,

Any chance you could post a picture of your setup and how this valve is integrated? I'm having trouble wrapping my head around it.

    Bookmark   December 4, 2009 at 4:32PM
Thank you for reporting this comment. Undo
hex2006

Hi Evil
I use high pressure aero so i don`t use a n/open solenoid or need a low pressure pump running 24/7 but the solenoid layout is very simple.
Fit a tee to your pump outlet.
Connect a pipe from the tee to your sprayers.
Connect another pipe from the tee to the inlet of the normally open solenoid. Note: the solenoid needs to be located outside the reservoir :)
Connect a pipe from the outlet of the solenoid and feed that back to the reservoir.

When the solenoid is off, the valve is open. The water flow from the pump takes the path of least resistance through the open solenoid and back into the res.
The sprayer path will present a much higher resistance to flow.

When the solenoid is on, the valve is closed which effectively blocks the easy path back to the reservoir so the water has no exit point except the sprayer path.

Solenoid Off: Pump > Tee > Solenoid > reservoir.
Solenoid ON: Pump > Tee > Sprayers.

    Bookmark   December 5, 2009 at 3:23AM
Sign Up to comment
More Discussions
New to Hydrophonics
Hello all ,Im new to the Hydro thing. Im going to start...
fespo
Blooms dropping on Red Robin tomato in my Aerogarden, no new blooms.
I'm new to Hydroponics, I bought an Aerogarden a few...
wertach zone 7-B SC
Switchin on/off cycles and wheather it should be gradual?
Hello, I was recently asked if it effects the plant...
Jeremiah Landi
coco peat as a medium
I have been using cocopeat for a very short while,...
theflgardener
Hydroponic Strawberries Questions
I have quite a few questions. I've watched a lot of...
NuclearTech76
Sponsored Products
Barrow Widespread Kitchen Faucet with Side Spray and Soap Dispenser
Signature Hardware
Vintage High-spout Polished Brass Bridge Kitchen Faucet with Side Sprayer
Overstock.com
iRobot Roomba 770 Vacuum Cleaning Robot
$500.00 | FRONTGATE
Modern Low Pressure Chrome Round Easyclean Shower Handset Hand Sprayer
Hudson Reed
Oil Rubbed Bronze 4-hole Kitchen Faucet and Sprayer
Overstock.com
Mint & Orange Personalized Monthly Desk Calendar
$21.99 | zulily
Allora Chess Design Lead Free Brushed Nickel Kitchen Faucet with Pull Out Spraye
eModern Decor
Thermocast Kitchen Chesapeake Drop-in Acrylic 33x22x9 5-Hole Double Bowl
Home Depot
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™