Anyone w/Inexpensive Misting System Plans?

Grancru(z5 MI)December 20, 2006

I would like to build an inexpensive mising system for propagation if it can be done for less than a commercial unit. Has anyone done this with success and if so will you share you plans?

If not, what commercial systems are you using?

Grancru

Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

John:
I have all the info to make one which will work with a timer, sprinkler valve and dram mist sticks. It will mist an area from 4' square to 4' X 12'. This would be an outdoor system but could probably work in a greenhouse. I was planning on doing cuttings under mist during the summer. Is this the kind of set up you are thinking of?
Mike

    Bookmark   December 21, 2006 at 8:48AM
Thank you for reporting this comment. Undo
Grancru(z5 MI)

Hey Mike,

It may work just fine. I have a 250 gal fish tank I wanted to play around with for rooting. I'd love to look at the plans. Can you email me?
Thanks
jtcrane@aol.com

    Bookmark   December 21, 2006 at 3:34PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

John:
I sent you some emails with the info. Let me know if you didn't get them for some reason.
Mike

    Bookmark   January 2, 2007 at 9:04AM
Thank you for reporting this comment. Undo
JamesY40(z7a)

Mike,
Would it be possible to email me the plans as well? Thanks,
jyeamons@yahoo.com

    Bookmark   January 4, 2007 at 2:13PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

James:
You got mail.
Mike

    Bookmark   January 4, 2007 at 4:01PM
Thank you for reporting this comment. Undo
Grancru(z5 MI)

Mike,
Just returned from vacation for the holiday and new year. I received your mail. Thank you very much. I will review everything and get back to you.
Thanks again.
John

    Bookmark   January 4, 2007 at 8:53PM
Thank you for reporting this comment. Undo
boomerj2

Mike -

Can I get a copy of your plans?
Boomerj2@aol.com
Thanks
Randy

    Bookmark   January 5, 2007 at 7:56AM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Randy you have mail

    Bookmark   January 5, 2007 at 12:16PM
Thank you for reporting this comment. Undo
JamesY40(z7a)

Mike, Thanks for the email. It has given me a lot of ideas.
James

    Bookmark   January 5, 2007 at 2:45PM
Thank you for reporting this comment. Undo
gardenfreak(7a)

Can I get an email too with the plans.
magmans@comcast.net
Thanks
Marilyn

    Bookmark   January 13, 2007 at 7:34AM
Thank you for reporting this comment. Undo
cmoejr(KY Zone 6)

Take a look at this system here. I may build one of these myself and give it a try. Cut and paste link below.

http://www.jasons-indoor-guide-to-organic-and-hydroponics-gardening.com/homemade-aeroponics.html

    Bookmark   January 13, 2007 at 11:51AM
Thank you for reporting this comment. Undo
bossjim1

Mike, would you send it to me also?
Thanks,
Jim
jimrstevens@sbcglobal.net

    Bookmark   January 13, 2007 at 12:30PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Marilyn and Jim:
You have mail.
Mike

For anyone else, if you send me an email request, I'll respond within a day or two.

    Bookmark   January 14, 2007 at 1:24PM
Thank you for reporting this comment. Undo
pink_oleander(Zb B.C.)

Can I also get an e-mail with the plans?
oleandertwo@hotmail.com

Thanks, Heather

    Bookmark   January 14, 2007 at 5:35PM
Thank you for reporting this comment. Undo
okiebum

can I also get a copy of the plans thanks beachbumfla52@yahoo.com

    Bookmark   January 14, 2007 at 9:49PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Heather and okiebum, you have mail.
Mike

    Bookmark   January 15, 2007 at 10:13AM
Thank you for reporting this comment. Undo
moonphase(z7 Ga)

I would also like your plans.I hope to do alot of cuttings this spring/summer to sell at the market
moonphase

    Bookmark   January 15, 2007 at 10:26PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

moonphase you have mail. Mike

    Bookmark   January 16, 2007 at 9:56AM
Thank you for reporting this comment. Undo
james12

could I also get a copy of the plans? thanks, james12

    Bookmark   January 18, 2007 at 5:41PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

James:
Send me an email and I'll forward a copy. See my page.
Mike

    Bookmark   January 19, 2007 at 9:01AM
Thank you for reporting this comment. Undo
terryb

mickey, May I get a copy of these plans also, so I can setup some type of misting system? Just send E-mail to Fiddler1way@AOL.COM Thanks

    Bookmark   January 19, 2007 at 9:34AM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Terry B. You have mail. Mike

    Bookmark   January 19, 2007 at 12:06PM
Thank you for reporting this comment. Undo
jbclem(z9b Topanga, Ca)

Mike, I'd also like to see your misting system plans...

Thanks, John

    Bookmark   January 20, 2007 at 10:38PM
Thank you for reporting this comment. Undo
annarborbuck(z5 OH)

Mike, I'd also like to see your misting system plans...

dougroth @ gmail . com

Thanks

    Bookmark   January 22, 2007 at 12:48PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Doug You have mail. Mike

    Bookmark   January 22, 2007 at 5:45PM
Thank you for reporting this comment. Undo
crispy

Mike,

You are very popular. Please send the plans to me too.

timber.storm@yahoo.com

thank you for your help

    Bookmark   January 22, 2007 at 10:31PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Crispy: You have mail. Mike

    Bookmark   January 23, 2007 at 8:45AM
Thank you for reporting this comment. Undo
rkapolka

Mike

Just when you probably thought you had received your last request for the mist system. Could you email me a copy?

rkapolka@msn.com Thanks, Rich

    Bookmark   February 4, 2007 at 5:39PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Rich: You have mail. Mike
For anyone else wanting the info, it's easier for me to send if you send me an email. Click on the link to my members page. Thanks, Mike

    Bookmark   February 5, 2007 at 8:10AM
Thank you for reporting this comment. Undo
michelec

Hey Mike, Would you mind sending your misting system plans to me tooo??? thank-you! neilmic@starband.net

    Bookmark   February 5, 2007 at 4:45PM
Thank you for reporting this comment. Undo
mickey_dee2002(zone5 MI)

Michelec: You have mail. For anyone else wanting the info, it's easier for me to send if you send me an email. Click on the link to my members page. Thanks, Mike

    Bookmark   February 5, 2007 at 5:52PM
Thank you for reporting this comment. Undo
ralph7

Hi all,
I'm about to try and set up my first mist system and would appreciate it if someone could send me the plans posted about above,
Many thanks in advance, email: ralphrw4@hotmail.com

    Bookmark   June 2, 2007 at 6:30PM
Thank you for reporting this comment. Undo
sib5(socal9)

Thank you mickey dee for the plans. YOU are the BOMB!

    Bookmark   June 11, 2007 at 1:24PM
Thank you for reporting this comment. Undo
dspeer75

I saw a thread on garden web about misting systems and plans you may have. Could you please email a copy of those plans?

Thank you very much.

    Bookmark   May 20, 2008 at 2:26PM
Thank you for reporting this comment. Undo
bobbya10(z7 SC)

Could you please send me your misting plans.
bbobbya10@yahoo.com Thank you

    Bookmark   May 22, 2008 at 10:38PM
Thank you for reporting this comment. Undo
gnomey(7b SC zip296)

My dad breeds tropical fish, so I have access to a lot of fish tanks. Could I get a copy of the plans for a mister?
Thanks!
gerrielder@gmail.com

    Bookmark   May 23, 2008 at 12:44AM
Thank you for reporting this comment. Undo
owens1994(6)

I'd love a copy of your plans too! Thanks.

    Bookmark   September 23, 2008 at 10:02AM
Thank you for reporting this comment. Undo
technologygarden

I built my own cloning box, (its really just a simple mister to help cloning) and you can find the plans and a step by step with pics to help you build your own

More info at http://www.technologygarden.net/index.php/diy-tutorials/tg-tutorial-building-your-own-homemade-aeroponic-cloning-machine/

Hope this helps,

-Eric
TechnologyGarden.net

    Bookmark   October 4, 2008 at 8:34AM
Thank you for reporting this comment. Undo
dwainbar

Mike,

Hate to ask, but could I have the plans for your misting system?

    Bookmark   November 30, 2008 at 8:39PM
Thank you for reporting this comment. Undo
daneh(5 So. ME)

Mike, how did those plans for the misting system work out? Can I see them?

    Bookmark   December 29, 2008 at 10:18PM
Thank you for reporting this comment. Undo
hostalavista(z5/6Oh)

Are these plans still available?
I would like a set.
Thanks linda

    Bookmark   February 28, 2009 at 3:34AM
Thank you for reporting this comment. Undo
lcdc59

I also would like a copy if that is possible, Thanks!!

Lester

    Bookmark   February 28, 2009 at 2:50PM
Thank you for reporting this comment. Undo
Jon

Here is a set-up with an inexpensive humidifier. It is a clip on grafting but the misting set up is explained.

Here is a link that might be useful: misting / grafting

    Bookmark   February 28, 2009 at 4:29PM
Thank you for reporting this comment. Undo
zerelda

Mike, I would love a look at your plans. Has anyone tried it yet and do you have pics?

Many thanks,

idyllwildgardens@myway.com

    Bookmark   March 10, 2009 at 1:07PM
Thank you for reporting this comment. Undo
raeben(z7 VA)

I'd like a copy too. Thanks!

    Bookmark   March 15, 2009 at 4:32PM
Thank you for reporting this comment. Undo
haskell_metrocast_net

I just found this website that has plans. They must be new...I have searched a million times for intermittent mist plans and never saw them before. They do have quite a few to choose from, and look like good plans. I haven't got one yet, but probably will soon.

Here is a link that might be useful: intermittent mist plans

    Bookmark   March 22, 2009 at 1:48PM
Thank you for reporting this comment. Undo
Grancru(z5 MI)

Yeah, for $47.00 they will sell you the same plans you can get by calling any manufacture and asking one of their sales team for assistance in creating a detailed punch list of your specific needs.

    Bookmark   March 22, 2009 at 2:53PM
Thank you for reporting this comment. Undo
logrock(7b (NW of Atlanta))

The key component of your misting system I'd say would be your controller. I invested in this one DIG 5006-IP, because I have plans to irrigate my green/screen house and even the nursery with it since it it so adaptable. That on-line store has all the nozzles and valves/solenoids but I bought some of the other little pieces stuff at the local home depot like controller wire and weird fittings to convert from a garden hose, through the valve to the 1/4" rubber hose which the fogger nozzels plug into. I should have bought a 3/4" valve/solenoid locally instead of ordering the 1" since fittings were hard to find for the garden hose input side.

Browse this guys's site and watch the videos on his FAQ page for ideas. That's basically what my rig looks like and it works very well. Or I can recommend just buying the pieces or the whole kit from him. It will last you for many years.

Also Mike, can you or someone forward me your plans? tulacat (at) comcast (dot) net .

Thanks,
Ron

    Bookmark   March 23, 2009 at 9:31AM
Thank you for reporting this comment. Undo
bbeds

I have been looking for plans for awhile. Could I get a set of these plans and/or places selling the parts to make one.
thanks

    Bookmark   April 15, 2009 at 7:35AM
Thank you for reporting this comment. Undo
kypropagator(z - 6)

are you still sending out these plans. please send me a set. thanks

    Bookmark   April 16, 2009 at 9:08PM
Thank you for reporting this comment. Undo
daneh(5 So. ME)

Quote" * Posted by grancru z5 MI (My Page) on
Sun, Mar 22, 09 at 14:53

Yeah, for $47.00 they will sell you the same plans you can get by calling any manufacture and asking one of their sales team for assistance in creating a detailed punch list of your specific needs."

Funny, if it was that easy, why did you start a tread looking for inexpensive misting system plans?

    Bookmark   April 18, 2009 at 8:03PM
Thank you for reporting this comment. Undo
Grancru(z5 MI)

Why, because I hadn't yet thought of calling to see how easy it really is and also to get some great suggestions and conversations from those actually trying to help each other here rather trying to scam whomever they can for a couple $$ such as yourself. Since Dec. 06 with a little research, help from the generous folks here and some phone calls there is all the FREE help you need. But why am I telling you this, it's probably how you got the info your are trying pawn off on others, RIGHT?
Maybe you should reconsider your deceptive and pathetic approach to selling crap anyone can get for free rather than posting ignorant responses like your last. You might try reading the rules of this site as well which prohibits sales pitches. Get a clue, get a life and please don't go away mad, JUST GO AWAY!

    Bookmark   April 19, 2009 at 1:11PM
Thank you for reporting this comment. Undo
daneh(5 So. ME)

Ah Yes, thanks for reminding me why I haven't been on this forum for quite awhile: the occasional incivility.

Sorry to have ruffled your feathers, but I assumed that because of the length of the thread and the amount of interest people have in plans, I would pass along that website. I could just as easily posted a link to a video I found that a guy explains how to build one, but because it is a series and is incomplete, it wouldn't have been very helpful. If I had done that, I am sure I would have received a nice comment on that too.

Please notice that I didn't send anyone to MY website where I sell misting systems and components, not plans. I do understand the rules.

Owning a nursery and propagating under mist for years teaches you a few things. That is where my knowledge came from, not from the free advice that is readily available. I found many years ago that most free stuff is usually worth what you paid for it.

I will grant your wish and go away, not because you asked, but because I prefer not to continue to participate in childish banter and be on the receiving end of uncivil remarks. I much prefer to communicate in an adult manner to the folks whom I deal with on a daily basis.

Again, sorry to have gotten you riled up for some reason. Have a great day!

    Bookmark   April 19, 2009 at 6:57PM
Thank you for reporting this comment. Undo
jebs

hi if you are still sending these plans can i have a set please bordeauxje@yahoo.com thanks

    Bookmark   April 28, 2009 at 9:59PM
Thank you for reporting this comment. Undo
kidbeam

I'd love a copy of the plans for the misting system if you still have them.
mbeamy28@comcast.net

Thank you,

Mark

    Bookmark   May 11, 2009 at 9:08PM
Thank you for reporting this comment. Undo
dlturner

Could I get a copy of misting plans if they are still avalible
Thank You
revfrdannyleeturner@gmail.com

    Bookmark   March 15, 2010 at 1:06AM
Thank you for reporting this comment. Undo
bethblue

I would really like those plans too if they are still available! Thank you. bethwagenius@yahoo.com

    Bookmark   March 16, 2010 at 7:50PM
Thank you for reporting this comment. Undo
johnny_a

I would love the plans as well if they are still available. Thank You Johnny_a_58@yahoo.com

    Bookmark   March 19, 2010 at 9:39PM
Thank you for reporting this comment. Undo
vschlaff

Hi Mike,
we just finished building our first greenhouse and I'm trying to convince my hubby into building a misting system for me. your plans sound great, could you email me also, and if possible send me a few pictures of what yours looks like. shawn wants to see pictures to get an idea of what he would be doing.
Thank you,
email is lexonildie8@yahoo.com
Ginny

    Bookmark   April 8, 2010 at 2:24PM
Thank you for reporting this comment. Undo
blumenkinder(z 5)

Yes, I also would appreciate these mister unit plans, if available. Grancru, thank you for your email, but my computer was unable to openthe links. I emailed mickey dee, no response, so if any of you did receive the plans from him before, would someone please send them? Thanks!!!

ladybugflower2@aol.com

    Bookmark   April 17, 2010 at 9:44PM
Thank you for reporting this comment. Undo
mommawoo

Hello to all!
I'm almost embarrassed to ask if any of you kind folks might send me a copy of a simple, but effective homemade intermittent mist system. THANKS in advance for your consideration.
Brendakoo

    Bookmark   May 10, 2010 at 6:49PM
Thank you for reporting this comment. Undo
countrysmiths(7)

I also would like the misting plans.

Thanks

Mark

countrysmiths@gmail.com

    Bookmark   May 12, 2010 at 11:05AM
Thank you for reporting this comment. Undo
bobbya10(z7 SC)

Is it still possible to recieve a copy of the plans?
Thank You
bbobbya10@yahoo.com

    Bookmark   May 16, 2010 at 10:01PM
Thank you for reporting this comment. Undo
stingbee

I am currently building a plant cutting grow device. Of course it is way over technical and would be willing to show people how to build their own.

It is based on a small inexpensive microcomputer. At this point I can measure the soil temperature and control the temperature, increase or decrease based on the set temperature automatically. I also have an automatic misting system that could be built independently.

Mine records the events, temperature and action, and when the misters go on and off. The misters deliver 1 gallon per hour.

I plan to add a soil moisture control so I can measure the soil moisture level so I have better control over the misting system. If anyone want to know more about how to do it, just leave a message.

    Bookmark   May 19, 2010 at 2:26AM
Thank you for reporting this comment. Undo
certified1992

Is it still possible to recieve a copy of the system plans?
Thank You

sister2revelry@yahoo.com

    Bookmark   May 21, 2010 at 12:47AM
Thank you for reporting this comment. Undo
aufin

I've been doing a bit of research on this subject as well, and, for what it's worth, I've decided to go a different route instead of trying to build someting. Seems everything I've found about "inexpencive" systems involve getting this timer, that timer, hook this together, adjust this, adjust that, etc. AND, I've decided a single purpose system might not prove to be very cost effective since I will be moving the rooted cuttings to individual pots with different watering requirements/system - and another timer, etc. For my money I've decided on the DIG 5006.IP timer which will control 6 zones with individual programs for each zone. DIG has other battery operated timers available for misting systems which, I'm sure, will do just as fine a job, but there again, single systems. If you look for the DIG battery operated timers be sure to look at the timers with a "P" at the end of the 710 series number. These will cost around $125. Not sure why the cost difference, must be the propagation programming. So, as I said, for cost effectiveness I've chosen the 6 system timer which can be found for under $100 delivered. You guys can play with your homemade systems if that is what you prefer, and I'm sure they'll do just fine, and I'm NOT knocking anyone wanting to go that direction, but I'm going to set mine up with a professionally designed timer that all I have to do is learn the programming ...... and also control other zones I already have being watered under other borderline acceptable timers, which I will find other uses for. I simply can't justify spending money for multiple timers when one timer can do the job of all. Just my 2 cents worth. BTW, mrdrip.com seems to have the best prices.

Also, you can find an in-line fertilizer made by DIG that can be used for fertilizer, insecticide or just as a water filter. The in-line fertilizer is exctly the same as the water filter but with a backflow preventer. I found mine at Home Depot for under $12. Online the same item cost around $15-16 + S/H.

Usual disclaimer - I have absolutely nothing to do with DIG or any DIG distributor (or Mrdrip). I just think their ready-made timer makes better sense for me and what I have in mind.

    Bookmark   July 10, 2010 at 1:21PM
Thank you for reporting this comment. Undo
laurahod_gmail_com

Please send me a copy of the plans, too. Thank you in advance!

laurahod@gmail.com

    Bookmark   July 25, 2010 at 1:37PM
Thank you for reporting this comment. Undo
roseyfuture(5b)

Could you also please send me the plans? much appreciated. my addy is jaguar.1968@hotmail.com

    Bookmark   July 25, 2010 at 8:56PM
Thank you for reporting this comment. Undo
ltruett(Zone, 9 Houston)

Could I get a copy too? Thanks.

    Bookmark   July 30, 2010 at 10:27AM
Thank you for reporting this comment. Undo
littlejew

Could I get a copy too? Thanks.

    Bookmark   September 5, 2010 at 3:42PM
Thank you for reporting this comment. Undo
pjlion

Hey Mike, do you still have those plans for an intermittant misting system? I'd love to see them

Stingbee: I'm wanting to start rooting plant cuttings too. Mind sharing your interesting sounding device? You said it's inexpensive. Around what was your total cost? I'm especially interested in the misting device.

I'd really appreciate anyone sending me plans! Thanks so much!

Email is pjlion1st (at) g mail (dot) com

    Bookmark   June 6, 2013 at 7:34PM
Thank you for reporting this comment. Undo
Bradybb(wa8)

This is one of the things I set up after seeing a video on Youtube.
It mainly consists of a container with lid, to hold the media,plants,water tray and pond fogger/mister.Also needed is an inexpensive timer that has15 or 30 minute increments.
Right now I'm doing mostly Blueberry cuttings,but have rooted other things like Cornus mas and Wisteria.
The Sterilite brand container had a solid color lid,so I framed one out of 1"x2"s and stapled some 6mil greenhouse polyfilm to it.I also drilled holes in the bottom of the container.The water tray is part of a kitty litter box.
I purchased the fogger/mister on Ebay for less than $10 total with shipping.That includes the transformer,so it's plug and play. Brady


Here is a link that might be useful: Propagation of Blueberry Cuttings Using Fog

This post was edited by Bradybb on Sat, Jul 6, 13 at 20:26

    Bookmark   June 12, 2013 at 12:46AM
Thank you for reporting this comment. Undo
GarynJeanna(Z 6b)

Mike are you still sending plans after 6 1/2 years? Would like to get a copy if so, thanks.

    Bookmark   July 1, 2013 at 5:08PM
Thank you for reporting this comment. Undo
mrunix(z8 FL)

Don't have any plans on paper, but I'm not sure if any are really needed! I built this homemade misting box years ago and have rooted thousands of plants in it.. with fantastic success. In a nutshell, it's simply a wooden frame that I covered with some scrap corrugated roofing panels. The bottom is made of hardware cloth for ventilation, and it has a front 'flap' made of plastic that flips up for access. The frame itself cost me nothing.. construction site dumpsters are a great source for wood and other materials, and the roofing material was found on the side of the road being thrown out by an owner who had just redone his patio.

The misting system itself consists of an automatic timer, 150 mesh filter, some 1/4" tubing, a few "T" connectors and 4 misting tips (foggers). The timer is an older Melnor 3060, which hooks up directly to a hose bib and has a great misting cycle (on for 2 minutes, off for 10, repeat). Uses two AA batteries so no electricity is required.. batteries will last a full season. I believe it was about $20 at the Borg when I bought it years ago. I also purchased a roll of 'mister landscaper' 1/4 tubing and a pack of assorted fittings (connectors, "T" fittings, elbows, etc..) for the plumbing portion. The filter is actually part of the fitting needed to convert from the 3/4" hose connection to a 1/4" barbed connection and it includes a removable 150 mesh screen filter. The misting tips are DIG 8810BB/8825BB foggers that run at about 0.5GPH at 35psi. You can pick up a 5-pack for about $4 at the Borg. I have one tip at each corner of the box, up at the top and facing slightly downwards and towards the middle for full coverage.

I built the box big enough to accept 3 standard flats with a little room around the edges. The system could really be made any size that you like, and the only real difference would be in the number of misting tips needed. The total cost for the system was around $40 and a little bit of construction time and sweat. My only problem so far has been that the fogger tips tend to get clogged fairly quickly.. we are on well water so I attribute this to mineral buildup at the orifice (which is quite small). They need to be replaced at least once a season, but fortunately are not that expensive.

Cheers,
Brad

    Bookmark   July 5, 2013 at 5:30PM
Thank you for reporting this comment. Undo
Bradybb(wa8)

Brad,
Maybe try a 200 mesh filter.It has helped me.Nice design. Brady

    Bookmark   July 6, 2013 at 10:25AM
Thank you for reporting this comment. Undo
love_the_yard(z9A Jax FL)

An inexpensive setup was posted just last week on the Florida Gardening Forum. See the link below and scroll down to post by Fawnridge on Monday, July 1, 2013. In his post, Fawnridge included a photo of his misting table and as well as a link to another simple mistbed design.

Carol in Jacksonville

Here is a link that might be useful: Florida Gardening Forum - Outdoor cutting station failing

    Bookmark   July 9, 2013 at 8:17PM
Thank you for reporting this comment. Undo
arch555

mike:

pls send me your misting plan at apcsia5@yahoo.com.

thanks,
archie

    Bookmark   December 25, 2014 at 3:36PM
Thank you for reporting this comment. Undo
AnnMedford

I'd love the plans too if you are still sending them, Mike.
Thanks!

    Bookmark   January 2, 2015 at 4:01PM
Thank you for reporting this comment. Undo
iliasred

Hey Mike, Would you mind sending your misting system plans to me tooo??? thank-you!
iliasdelis@yahoo.gr

    Bookmark   January 8, 2015 at 1:14PM
Sign Up to comment
More Discussions
Flower buds growing and swelling on callery pear tree cuttings?
i took 12 cuttings of a pretty callery flowering pear...
tlbean2004
wanted cuttings for Weeping Willow for Postage
Will pay postage for some cuttings that will grow in...
happytomato2008
Speed up Plant Propagation!
This will not be needed for most plant propagation...
hummersteve
problem with carica papaya seedling survival
Hi I live in a temperate zone, have a large conservatory,...
marcyoung
Apple Tree from seed
Hello knowlegeable people! I have some trees started...
bobcat115
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™