|
| This isn't a rock garden question but I'm not sure where else to post this, and maybe somebody here has dealt with a similar issue--
My yard is long and narrow, on a fairly steep slope that was terraced with landscape timbers by a previous owner. The timbers are 20+ years old, rotting and beginning to sag and fail. I will need to rebuild the retaining walls within a couple of years, and I'm leaning towards using interlocking concrete blocks as a do-it-yourself project. Most of the retaining walls are low, about 24", with the highest one about 36" tall. Here's my question: I would like to have ferns and other small shade-loving plants growing on the wall so rather than setting the stones tightly against each other, and with the recommended gravel and landscape fabric behind it for drainage and soil retention, can I use just soil and leave gaps between the blocks where I can plug in plants? Since the walls are fairly low and the terraces will be heavily planted I think I might be able to get away with this, without worrying too much about the walls failing or soil washing out. Has anybody tried anything similar? BTW here's a photo of my yard, taken in December when the retaining walls are most visible:
And here's a view of the garden in summer:
|
Follow-Up Postings:
|
| Let me start by telling you that you have a beautiful garden! I brought in the expert to look at your question and offer an opinion, the hubby is a bricklayer and has plenty of experience with retaining walls. You, unfortunately, have way too much soil that needs to be held back to prevent the wash out that will occur without a full retaining wall. The terraces would erode rather quickly if you just had retaining blocks stacked loosely. Their strength is in having them stacked tightly with the gravel interlocking them. Sorry to disappoint. Good Luck, |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Alpines & Rock Gardens Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.