Return to the Azalea & Rhododendron Forum | Post a Follow-Up

 o
Why aren't my Yaku Prince Rhodies blooming?

Posted by AbsentMindedOwl 5 (My Page) on
Mon, Jun 3, 13 at 12:36

Dear Fellow Gardeners,
I have a woodland garden in southwestern New Hampshire, zone 5. I planted 8 Yaku Prince Rhododendron along a rock wall that faces northwest, and is under white pine trees last year. This spring, only one has bloomed. The one that bloomed does receive a bit more morning sun than the others. The plants are at the edge of the woodland, right next to a meadow, so they do get both light and shade.
Usually I buy plants from some very fine sources, but there were 8 for $50 at Home Depot, and I bought them late and planted them in late July, I believe. The root balls were solid rocks, I tried to pry them open a bit with a shovel, but it was tough going.
I planted with compost and holly tone. I watered with a sprinkler hose from time to time. We had a good winter, not too cold, but a decent snowfall. Some of the leaves are brown at the tips, which I understand may be due to windburn. The new leaves look fine.
Any suggestions? Should I dig them up and try to try open the roots some more? Should I move them to a sunnier spot? I did dig up one and move it to a new location, which faces southeast. I discovered then that the root ball had not budged in a year.


Follow-Up Postings:

 o
RE: Why aren't my Yaku Prince Rhodies blooming?

If these were one or two gallon size plants, chances are they were simply too immature to set buds last summer/fall. Even for larger sizes, it's quite common to not have any bud set in the first year after planting out.

Given your experience with the root balls, it is probably worthwhile to dig up one or two to see what shape they are in even if this has little or nothing to do with the lack of bud set.

Seriously matted root balls need more than a bit of prying with a shovel. You need to eliminate circling roots at the edges and bottom. This may mean cutting with a sharp knife, using a hand cultivator as a claw and/or a forceful stream of water from a hose to expose1-2 inches of the root ends. You'll lose some roots and think you're committing rhododendron murder, but it's the only long term cure. Once that's done, water by immersing in a bucket for the ones you dug and letting a hose trickle at the base of the plant for a half hour or so each time they need water for the rest and after replanting. A sprinkler hose will not wet a dry peat-based root ball. You want to wet the root ball, not the surrounding soil. Saturated soil makes it more difficult for the roots to extend out from the existing ones. You may have to water like this for a second year as well.


 o
RE: Why aren't my Yaku Prince Rhodies blooming?

Yes, more sun in June and July may stimulate more flower buds for the following spring. Since you bought yours in July, it may have been the shade at Home Depot combined with the current shade that is causing the lack of bloom. You may be OK next year.

I agree 100% with opening up the roots, soaking for an hour and replanting.

Here is a link that might be useful: How to plant (Rarefindnursery).


 o
RE: Why aren't my Yaku Prince Rhodies blooming?

Dear Rhodyman and Maingrower,
Thank you for informing me that the rhododendrons simply may not bloom the first year out. I did dig up one and set it in the water for a half hour after doing the major cut as suggested. Yes, I did feel like I was committing rhodie murder, so it was helpful that you had told me I might feel that way. I did replant, we shall see if one more year works wonders.
Now, I see my rhododendron maxima in a different part of yard have no blooms set either. Sigh. I see this rhododendron mania requires patience.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Azalea & Rhododendron Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here