|
| I made this tree basket with Begonias in mind
An easy project, can be done without welder if you drill and use small nuts & bolts All you need is an old tree stump, some strip metal, not too thick -- so it will bend easy, plus a few leaves etc from a local friendly wrought iron railing/gate fabricator
I used an old barrel to bend the vertical metal That black fabric is the stuff they use to keep weed down, but anything will do Put in some good rich potting soil and as many plants as possible
|
Follow-Up Postings:
|
- Posted by greenelbows1 z9--so LA (My Page) on Fri, Jun 8, 07 at 21:31
| That's beautiful, and a very good idea. Wonder if I can get my son to do one for me! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Begonia Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.