Return to the Gardening in Canada Forum | Post a Follow-Up

 o
Caring for Spiraea X Vanjoutte

Posted by timcadieux 5A Ottawa/Hull (My Page) on
Tue, Jul 3, 12 at 14:09

I've recently purchased a home with a hedge of what my neighbor told me was Spiraea x vanjoutte. It was growing out of control and hitting about 10feet tall. There are about 40plants, forming a hedge. My neighbor told me it was never pruned before, so I spent the weekend removing dead branches. The local garden shop suggested I cut one in every 3 branches, I did so but they also told me not to lower the height by pruning.
I was hoping to drop it to about 5feet, hopefully causing the bushes to bloom lower and thicker. Suggestions?


Follow-Up Postings:

 o
RE: Caring for Spiraea X Vanjoutte

Hi Tim: I don't have any real advice since my Bridal Wreath Spirea is a single plant, which looks like a beautiful waterfall each spring. But you may want to have a look at this article and see her take on spirea hedges:

http://gardenrant.com/2009/05/spirea-me-baby.html

Good luck.


 o
RE: Caring for Spiraea X Vanjoutte

I did not read the gardenrant article but this is what I learned in a landscaping class years ago.
A woman in the class had the same question. The instructor advised she cut her whole hedge along side of her driveway to almost ground level. A drastic solution! She did and the hedge grew back with new healthy branches. That was 20 years ago and she's has the nicest flowering spirea hedge ever since.


 o
RE: Caring for Spiraea X Vanjoutte

No,no, no! Do not cut it all back at once if you want to maintain a nice flowering hedge! The 1/3 a year is the right thing to do. A property in the neighbourhood has/had a spectacular Bridalwreath spirea hedge. When the property was sold a few years ago, the new owners tried to trim it up as a more formal hedge - which looked awful and, since they trimmed it in late summer, eliminated 90% of the flowers for the following year! We got to know the new owners at a neighbourhood Christmas party and got talking about the hedge and how to prune it properly. It is now back to being a spectacular cascade of flowers in June and they love it.

By pruning 1/3 of the stems (choose the oldest/thickest ones to remove each year - prune immediately after flowering is finished) you control the height and width of the hedge while ensuring that the hedge consists of the 'old wood' (at least one year old growth) necessary for maximum flowering.

By taking 1/3 of the stems out each year the hedge will consist of 1/3 relatively short one-year-old wood, 1/3 mid-height 2-year-old wood, and 1/3 taller 3-year-old wood. The hedge should be about 5-6' tall by the third year of pruning this way and it would remain that height if the 3-year-old wood is the stuff that is removed after flowering each year. Having the equal mix of 1,2, 3 year old wood ensures a lovely cascade of flowers. If you cut it all down at once, the cascade effect is lessened because most of the stems will be roughly the same height.


 o
RE: Caring for Spiraea X Vanjoutte

Yes, that method is what is mostly recommended to maintain a flowering shrub. I was passing along a suggestion made for an old row of out of control shrubs.:)


 o
RE: Caring for Spiraea X Vanjoutte

sharon - even an old row of Bridalwreath can be brought back into shape/control using the 1/3 method. That way, if the shrubs are a hedge, you don't lose privacy for a year or two while the cut-down hedge regrows.


 o
RE: Caring for Spiraea X Vanjoutte

My bridal wreath spirea is taking up too much space in my new front garden. I love it only when it blooms in May. I trimmed a little in early June but not enough; I desperately want to take my shears to it right now. How much damage will I do if I took my shears to it right now, in August?!


 o
RE: Caring for Spiraea X Vanjoutte

You would lose many of next year's flowers if you cut it back now. It is better to hold off until next year and whack it down just after the flowers start turning brown. If you want to keep it short always, you could cut it back hard every year after it flowers, rather than doing the 1/3 each year. But that will eliminate the tiered cascade effect as all the growth will be one height, although it will still be a nice fountain-like effect - but too short to be maximum impressive :-) And, if the height serves any screening purpose, you'd lose that...

It sounds like perhaps the shrub is just too big for the space and maybe you should consider replacing it with something more approprite in size...?


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Gardening in Canada Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here