Return to the Carnivorous Plants Forum | Post a Follow-Up

VFT Leaf Cutting Status Check

Posted by agentrdy 7 (My Page) on
Sun, Sep 16, 07 at 23:39

Hey everyone

From what I've been able to research, you shouldn't try to root VFT leaf pullings now, but, well, I did anyway. It's been dipped in rooting hormone with about a centimeter or so of the white bulb remaining and the trap cut cleanly off of the petiole. I have it in a dish of moist peat moss inside a sealed plastic bag, and it's getting direct sunlight for quite some time in a bright windowsill.

It's been approximately 6 days, and the leaf has turned completely black (some, including the bulb portion, is buried under enough peat moss to secure it and it may or may not be blackened also). Is this just something that happens, or does this mean it's time to throw it out and perhaps wait till next spring? The leaf was rather old to begin with, but nowhere near dead and perfectly green. Could it be a problem with humidity, or too much direct light/heat? As this is my first attempt to root a cutting, any help would be appreciated from those who've succeeded!

Follow-Up Postings:

RE: VFT Leaf Cutting Status Check

I haven't rooted any leaf cuttings myself, but my first bet would be that the heat in the sealed bag got much too high and that's what killed things off. The fact that the leaf died so quickly really points to overheating, IMO. If you try it again, I suggest putting them close under fluorescent lights, which put out moderate light but very little heat. And I wouldn't seal the bag too tightly... they still have to breathe.

RE: VFT Leaf Cutting Status Check

I do it any time of year. As long as you have decent lighting over it, it can sprout. Blacked material is normal, even if the basal part does sprout. Give it more time to indicate whether it is tryly dead or not.

What I like doing is embedding the basal part in living LFS, exposed to the air, and kept wet. It can take several weeks before you see anything sprout.

This method also works:

Photo Sharing and Video Hosting at Photobucket

RE: VFT Leaf Cutting Status Check

Is that plain, distilled water you've immersed the cuttings in? Any hormone, etc. added to it? Is it necessary to leave a bubble of air at the top for breathing or can the entire VFT cutting be submerged? I might try make another go after the plant heals... what is a reasonable length of time to allow it to recover?

RE: VFT Leaf Cutting Status Check

There is an AWESOME website with lots and lots of FAQs, as well as some really specific stuff:

It's nearly as addictive as this one.

RE: VFT Leaf Cutting Status Check

Yeah, I've been through Barry's site already but unfortunately it seemed like my questions were a little more specific (although major props to him for undertaking such a project--some parts are pretty funny to read too, like the section on protecting your plants from pests). I was severely addicted to his FAQ for the better part of a week or so ;p.

RE: VFT Leaf Cutting Status Check

Distilled or RO or deionized would be the best, as it is the cleanest. I think that these were actually done in rain water. No hormone used. No bubble was intended. The D. binata take ~3 weeks to sprout. VFT's take longer. The important part is the basal (white) part of the leaf. Personally, I find that VFT leaves do best when the basal part of the leaf is embedded in live LFS, exsposed to the air, right at a window sill.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Carnivorous Plants Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here