Return to the Fig Forum | Post a Follow-Up

 o
Simple scion gathering instructions

Posted by milehighgirl CO USDA 5B/Sunset 2B (My Page) on
Thu, Nov 8, 12 at 15:05

I was mentioning my interest in figs to a friend in PA and she said there's a fig tree on the property she is renting. I told her I'd like some cuttings of it but since I've never done it I want to make sure I give her correct instructions.

I believe the tree should be dormant and that she should take the most recent year's growth; that the cutting should be between 9 and 12 inches. Is this correct?

When I get them I should dip them in a 10% bleach solution and let the bleach water dry on them. Then I should dip them in rooting hormone, and use a good rooting potting soil mixed with 50% perlite. I should plant them in clear plastic glasses with holes on the sides and bottom (I found that using a hot glue gun without the glue works well). I should keep them in a large Rubbermaid clear container at a steady temperature of 70 degrees F.

Am I missing anything?

Is there a link that gives better descriptions that I can send her?


Follow-Up Postings:

 o
RE: Simple scion gathering instructions

http://figs4fun.com/Rooting_Bag.html

http://figs4fun.com/basics.html

Clean and steril stock and water is best given the length of time in a high humid environment because of fungus and mold can also take off in the bag. Soft green cuttings have some success using the technique you describe, hard wood tip cuttings from dormant trees have better success using the bag technique. Depends on the actual stock, time of the cuttings, and humidity level and consistancy during the rooting period.


 o
RE: Simple scion gathering instructions

I went through the links you gave but I'm still confused regarding the type of wood. I should ask her NOT to send the tips but more woody cuttings, is that it?


 o
RE: Simple scion gathering instructions

Hi,

I'm sure others more knowledgeable will weigh in, but I personally like the latest season's growth (tips of branches), probably 6-9 inches long. I do bleach them but don't use rooting hormone and use the bag method. I keep them at about 70 degrees and check them daily for moisture levels and mold. When roots develop, they are very fragile. I usually let them get 1/2 an inch long and pot up carefully. Then the biggest problem is overwatering in the clear cup.


 o
RE: Simple scion gathering instructions

Here is a tip when cutting the scions: Make a horizontal cut for the BOTTOM of the scion, and an angled cut for the TOP. The scions will then have a flat bottom and a pointed top. Useful for keeping them right-side-up.


 o
RE: Simple scion gathering instructions

bob17257,

That's a great tip. Thanks to all. I'm sending her the link to this post. Who knows, it may be a "new" cold-hardy fig!


 o
RE: Simple scion gathering instructions

Just what I wanted to know, Thank you! I have 2 different fig trees but don't know which they are. Wanted to start some figlings(lol) because we rent and will be moving in a couple years. These trees from what I was told are over 30 yrs. old and have such delicious fruit.
I do have a question. If I take tip cuttings, do I cut diagnally and do I leave the bud tip on or cut it off?
Thanks again & Happy holidays!


 o
RE: Simple scion gathering instructions

Probably the most important thing is to make sure that you have at least 3 segments (look closely and you will see seams in the bark marking segments) in your 6-9" cutting. I leave the bud tips on mine most of the time. I like horizontal cuts for the bottom of the cutting. If you cut the tip off, use a diagonal for the top and you will know which end is up. Try to make the bottom cut below a seam, but not too far away, say a half inch below the seam.

Scott


 o
RE: Simple scion gathering instructions

Thank you Scott!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Fig Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here