|
| (please not I am also posting this in the Container Gardening forum as I'm not sure which forum is best for getting an answer. I hope that's ok) So like every new gardener I made a rookie mistake. I got too excited about planting and did not take enough time to properly amend/prepare my soil. (bows head in shame) As a result, I have 4 hydrangeas that suffered from my overeagerness, but have somehow managed to dwindle along for a year now. Now before they completely die, I've decided to swallow my pride and ask for help. Here are the issues: My Plan of Action: MY Questions: Please chime in with ANY and ALL advice. I know I've made horrible mistakes but I really hope to avoid them from now on and I'm very eager to learn! Thanks!! |
Follow-Up Postings:
|
| Your Questions: *When should I make the move to the containers? The best time is when the plants are dormant and that is usually the winter months. There are many eons of potting mix solutions that you could use. Many used a pine bark based potting mix. Most suggest that you do not mix in soil from your own garden. Put a mesh and some rocks (on top of the mesh) at the bottom. The mesh prevents critters from getting into the pot from below. The rocks help with drainage; about an inch or so is enough. In places that are hot or windy like your zone, I would also mix polymer gel water beads into the potting mix. Watering, feeding and sunlight are the issues one usually encounter with potted hydrangeas so once you find a medium that fits, stick with it. Some nurseries may have around some gizmos with wheels to help you move these heavy pots around as sunlight exposure changes thru the year. Consider buying one per pot and a few extra ones in case they break. I would also get a soil test done with the garden soil in order to see how to improve it. Local nurseries offer this for free during winter (I try to buy the ammendments that the results recommend from them to make it up). Hope that helps, |
|
- Posted by DandyLioness 9 (My Page) on Mon, Jan 21, 13 at 23:56
| I'm having trouble finding mesh...any suggestions on where to look? About the leaves: in the current location, the edges turn brown and crispy, and the veins are yellow. I'm assuming this means they are in too much sun? Please do confirm if so. And thank you so much for your responses! |
|
| If you see the leaves turning brown from the edges inwards, that may signal a moisture problem. Yellow veins are rare and could signal a mineral defficiency (nitrogen for example). If the leaves in direct in contact with the sun turn all yellow or white-ish, that would signal too much sun. An iron defficiency looks differently: the leaves turn light green or yellow but the leaf veins remain dark green not yellow. |
|
| Not sure if this is what Louis actually meant or would use, but the type of "mesh" that I have used over drainage holes at the bottom of a container is (aluminum) window screen. It can be purchased in small rolls more economically than the patch kits. hth, |
Here is a link that might be useful: example of aluminum window screen
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Hydrangea Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.