|
Sun, Mar 30, 08 at 23:17
| Hey forum,
I'm planning on constructing a small NFT system out of PVC fence post, as seems to be a popular alternative to buying a system (this is my first venture in hydroponics). I'm wondering how ppl cut holes in the PVC for the plants. I've only seen one posting about this, and that person had used a hole saw. Is this the standard/only way that people cut the holes? (the holes im thinking of are for net pots to be placed in, 2-3" in diameter) Thanks all |
Follow-Up Postings:
|
|
| For heavy weight plastic, the holesaw is the way to go. for thinner plastics sometimes I'll use an exacto knife. By thin, I mean the weight of a 5 gallon bucket lid. Anything heavier and use the holesaw. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Hydroponics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.