Return to the Hydroponics Forum | Post a Follow-Up

 o
Growing with nutrient film techinque

Posted by tommilak (My Page) on
Fri, Apr 17, 09 at 15:50

Hello.
I have some questions about growing plants hydroponically with nutrient film technique.
I know the main principles how this system works, however I don't understand how should new plants should grow there.
I have planted some lettuce seeds into dirt and they are now already quite big and should be repotted. I am planning to remove the dirt around the roots and put into another pot with expanded clay and put it into my hydroponic system. But how should the new plants get any water and nutrients if their roots don't touch the nutrient film?
Also I'd like to know how big should the pots be to put the plants into?
I hope someone could answer my questions.


Follow-Up Postings:

 o
RE: Growing with nutrient film techinque

Estonia; what's the climate like? Lettuce doesn't like heat, just in case it's hot there.

Lettuce may be better grown on a ramp (floating in nutrient). Also, growing seedlings in dirt, you're likely going to pick up some soil-borne critters and maybe microbes, which you really don't want. Try to transplant your seedlings as little as possible. Once you have more experience, it's not a big deal, but for a beginner, it's way easier to stick to one method at a time.

It would be better to start your seeds hydroponically and when the plants are about three inches tall, suspend their main stems above the NFT trough so the small white roots dangle in the trickle of nutrient. I would use perlite to start the seedlings; it will shake off the roots easily when it's time to transplant to the NFT system.

Suspending the little plants into the NFT system can be done any number of ways. I've done this and used small wads of fiberglass wall insulation to hold the stems while the seedlings grow. At harvest time, I merely cut the plant at the fiberglass and throw the roots and all into the compost heap.

If you're going to use NFT, you don't need the little pots full of expanded clay balls. Just suspend the seedlings from the top frame of the NFT trough.

If this is your first try at hydroponics, my advise would be to start with something a little simpler like growing using static culture in perlite or using a ramp, which is a raft that holds the seedlings on a lake of nutrient 24/7.


 o
RE: Growing with nutrient film techinque

Well one thing we don't have enough in Estonia is heat :D
I would still like to start with the NFT because the lettuce is just an experimentation. If everything goes right I would be starting to grow other plants.
I have noticed that when the dirt around the lettuce roots is dry enough it would come off real easy and the small stuff that still is on the roots, could just be washed away.
I have also thought to make a system that is similar with the NFT but uses drip irrigation. Water would still flow on the bottom of the pipe but it would all come separately to every plant from the top. I hope you understand what I mean. What do you think of this plan? Or would the usual NFT still better?


 o
RE: Growing with nutrient film techinque

Sounds like you're going through with it.

Do yourself a favor: If you're going to start the seedlings in dirt, wash the roots very carefully in tepid water. If you try to shake the dirt off dry roots, you'll damage them.

There are very tiny almost hair-sized roots that need to remain in tact for the seedling to stand any chance of transplanting from soil to NTF or whatever method you finally choose.

As far as exactly which method to use, I'm a firm believer in "KISS" (Keep It Simple, Son).


 o
RE: Growing with nutrient film techinque

I have also thought to make a system that is similar with the NFT but uses drip irrigation. Water would still flow on the bottom of the pipe but it would all come separately to every plant from the top. I hope you understand what I mean. What do you think of this plan?

Drip irrigation (usually with a medium such as sand or perlite, to retain moisture) with subsurface recovery like you described is one of the most, if not the most, widespread commercial methods of hydroponics.

Be careful with letting the roots of your plants dry out. That's a good way to kill a plant.


 o
RE: Growing with nutrient film techinque

One idea that might work, depending on how your NFT system is built, would be to raise the point at which water drains out of the gutter to a level that would cause it to fill up with water a bit. That would make it easier for the plants to reach the water and not dry out, then when the roots are long enough you can gradually lower the drain until it becomes NFT.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Hydroponics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here