Return to the Hydroponics Forum | Post a Follow-Up

Aeroponics and pump size

Posted by Baci z10Ca (My Page) on
Fri, Jul 2, 04 at 18:54

Is there a way to determine aeroponics pump size needed based on the gph pump rating, tube diameter, and distance the nutrient needs to travel? Thanks.

Follow-Up Postings:

RE: Aeroponics and pump size

Welcome to the world of fluid dynamics.

There are nomographs with pressure plotted against flow and there are charts showing pressure drop for pipes which the pipe manufacturer publishes.

Find pressure drop in pipe at volume you need and then pick a pump.

RE: Aeroponics and pump size

  • Posted by Baci z10Ca (My Page) on
    Sat, Jul 3, 04 at 18:37

Thanks Willard. I kept trying to set it up as a physics problem working with pressure & pipe volume but could not get my units to cancel. I will look at the nomographs & go from there.

RE: Aeroponics and pump size

  • Posted by rosco New Zealand (My Page) on
    Sun, Jul 4, 04 at 2:07

Just what are you trying to do??????????/
Without getting too complicated depending upon the height you need to lift and the flow you wish to acheive is important. Sometimes people will try to over- commit you but with experience you'll find that the bare essentials are enough.
Hydroponic's is a lot of fun but can easily become an expensive hobby if you accept information which makes it more than it has to be.
Take it from one who's been doing it for a long long time.
Kind regards. Rosco

RE: Aeroponics and pump size

  • Posted by Baci z10Ca (My Page) on
    Sun, Jul 4, 04 at 8:48

Hi Rosco. I was trying to figure out a pump size for someone else. You are an aeroponics grower, aren't you? The system was:
have 2 small barrells 10 round and 16-18 in long.
each will hose 3 plants and a 14in bubble stone each will a 120gph pump service
this system with 2 sprayers or drips per container running around 36 in of tubing 1\2?
What size pump is needed? (I don't have the lift height on the pump).
Any suggestions? Thanks.

RE: Aeroponics and pump size

In an open system like hydroponics, lift height is the most important number.

Pressure drop from 36" of 1/2" piping will be small enough to ignore at low pump volume.

Pumps will be 120gph at lift height.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Hydroponics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here