Return to the Growing under Lights Forum | Post a Follow-Up

 o
New Seed Starter Setup

Posted by CharlieBoring 7 (My Page) on
Wed, Jan 16, 13 at 7:01

I am preparing to buy the components for a DIY grow light setup for my basement. I am trying to keep the cost down while making it pleasing to the eyes and providing adequate light to start or over-winter plants. I have found a shelving unit (74"X48"X18", 5 tier) at Lowes for $80. Is it worth the extra $20 expense to get a 24" deep unit? All others are more expensive. For lights I intend to use Fluorescent Shop Light ficture (T8 48 inch) Model SL-1, one per shelf ($12 each). With GE 32 watt T8 Daylight bulbs (6500K)($8 each). I will attach the chains with "S" hooks and supply power with a surge protector strip. Considering my goals, does anyone have any recommendations?


Follow-Up Postings:

 o
RE: New Seed Starter Setup

That sounds good to me. If the shelves were any wider, you'd need two shop lights per shelf. I hope the back and sides of the shelf unit are open for good air circulation. Enjoy!!


 o
RE: New Seed Starter Setup

Thanks starting threads "CharlieBoring". It sound good for me and DIY grow light is one of the best setup use for indoor cultivation.


 o
RE: New Seed Starter Setup

Well, I set up my light system. Lessons learned - 5 shelves do not lead sufficient room for raising the lights, suggest 4 shelves. So far the only items I have under the lights are 2 goji berry bushes in pots until spring when I will plant them outside and potted geraniums. For these plants 12 hours of light are sufficient.


 o
RE: New Seed Starter Setup

I have similar sized shelves to what you have, only 18" deep. In order to get the maximum amount of plants per shelf (seed starting) I run my trays/flats front to back. I have to have two fixtures per shelf in order to get decent coverage running them this way and I'm convinced if they had three it would be better because the plants on the outside edges of the flat are constantly trying to bend inward significantly. The flats just barely hang over the edge of the shelf, however due to the limited space between the front and back shelf support rods the lights cannot overhang so they miss some coverage on the outskirts ( I converted my shelving unit to chains instead of vertical rods and hung it but it's still the same problem). Two is the maximum number of fixtures I can squeeze in there per tier and that's just barely. I don't know the model # but I am using $17 T8 4' fixtures from Walmart.

Just some observations from a fellow newbie, I built mine in November. I also had a very narrow amount of space between the top light and the ceiling (we're talking maybe 4". So as an experiment and since I hate to see space go to waste I actually put a shelf above the top tier light and started several flats of veggies up there because it was very warm even though it received virtually no light. The seeds germinated wonderfully! Unfortunately because it's difficult to see up that high without a little step stool I didn't realize they had germinated so they were already very lanky when I caught it since it's so dark up top. Worked great as long as you check them daily, I must have missed a day.

Good luck with your setup!


 o
RE: New Seed Starter Setup

I got this shelving at Home Depot but you have to get it online it is $89.99 now but you get free shipping.

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=203800338&R=203800338#.UR1AF2eAN2Q


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Growing under Lights Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here