|
Sun, Mar 14, 10 at 20:57
| I bought a double lamp, 2 feet, 20 watt light fixture for starting seedlings. The ballast is a 120 volt one and it had a bare black and white wire for the electricity. I know that this fixture was meant for ceiling installment but how can i modify it to be able to connect it to my wall outlet instead???? |
Follow-Up Postings:
|
- Posted by urbangardenfarmer (My Page) on Sun, Mar 14, 10 at 23:52
| Get an extension cord, cut off the female end(the end that doesn't plug into the wall) and wire it to your light. Your fixture should have come with wire nuts. Use those to make the connections and then wrap electrical tape around it. Hope this helps. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Growing under Lights Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.