Return to the Growing under Lights Forum | Post a Follow-Up

 o
pulse start metal halide and hps compatibility

Posted by dissturbbed none (My Page) on
Sun, Jun 23, 13 at 4:19

I was wondering since both a pulse start metal halide and high pressure sodium have ignitors are the bulbs interchangeable?


Follow-Up Postings:

 o
RE: pulse start metal halide and hps compatibility

Not recommended - although i have not tried. The pulse start uses a stronger pulse to get going than the HPS. You might try visiting the Venture site, venturelighting - it is quite informative really. That's where I get my pulse start halides from and the ignitor. A 575 W PSMH required a remote ignitor very close to the lamp, otherwise the pulse is attenuated by the lamp cord, whereas HPS is fine with just a standard ballast setup. There are some ballasts that may be good for regular MH and HPS, but not pulse start as far as I know.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Growing under Lights Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here