HPS Reactor ballast
koalah
18 years ago
2 main questions.
1.)Can I use hps reactor ballasts for hydroponic lighting?
This is my situation:
I have a 150W weatherproof security floodlight that had been cycling on & off. It finally stopped working and I bought a new lamp to fix it.
The light still does not turn on, so I took it apart. I looked at the starter and there appears to be a crack in the glass or plastic part, where the 3 wires come out. I don't see a capacitor. Do all ignitors have 3 wires and all capcitors 2 wires?
2a.)Can I buy any 150W ignitor to replace this?
2b.)Is there a difference between ignitor & starter?
Heres the info on the ballast:
USTA-150-HPSH
E169822
VOLT: 120v 60 Hz
Wattage: 150
Current: 3.0 Amps
Lamp: S55 HPS
Class H insulation system
Starter:
USTA CO., LTD
E169834
Catalog NO: USTA -55H
55 VOLT HPS Starter
Both ballast and starter have a backward "R" then u, twice.
If I have to replace both ballast and starter I would like to go with this Reactor kit.
http://www.pfolighting.com/ProductDetails-1505-150WATT120HPS%20REACTOR.html
nygardener
Related Professionals
Folsom Landscape Architects & Landscape Designers · Finneytown Landscape Architects & Landscape Designers · Ashburn Landscape Contractors · Burlington Landscape Contractors · Eustis Landscape Contractors · North Chicago Landscape Contractors · San Carlos Park Landscape Contractors · Cherry Hill Fence Contractors · Crofton Fence Contractors · Meridian Fence Contractors · Seymour Fence Contractors · West Hollywood Fence Contractors · San Lorenzo Fence Contractors · Orangevale Fence Contractors · Boca Raton Roofing & Gutters