|
| Any thoughts on which type of spreader is the best? We just recently moved into our house and I'll eventually be starting up an organic lawn care program (after I do some research and find some more time.) It would seem one essential piece of equipment that I'm lacking is a spreader. Any recommendations on a drop spreader versus a rotary spreader? We have several sections to our lawn that are about 4-6 feet wide, plus quite a few landscaped beds (and a veggie garden that'll be going in soon.)
Just curious which would be the most useful for the range of potential things I may spread across my lawn in an organic program. As a kid, my dad had a drop spreader, so I've used one of those quite a bit in the past, but have no experience with a rotary spreader. How accurate can they be? I've heard they're more efficient and have less problems with "zebra" lines. Another question -- with organic fertilizers, would "zebra" lines show up as much as with chemical fertilizers? Most organic fertilizers are much slower release, I thought. Thanks in advance,
|
Follow-Up Postings:
|
- Posted by lou_midlothian_tx z8 DFW, Tx (My Page) on Sun, May 11, 08 at 11:35
| I MUCH prefer rotary spreader over drop spreader. A lot faster. You won't get zebra lines with organic fertilizer. |
|
| I prefer a broadcast spreader for organics. You don't have to be precise with the application, and it's much faster. A little bit of soy meal in a flower bed won't hurt anything either. |
|
- Posted by morpheuspa 6 (E PA) (My Page) on Sun, May 11, 08 at 12:22
| Here's another vote for a rotary. I use a Scott's Standard and love it--it's much faster than a drop, and some organic materials don't go through a drop spreader very well. A little bit of soy meal in a flower bed won't hurt anything either. A lot of soy in the flower beds is a major advantage. I used 50 lbs per thousand at the end of winter to prep the beds. The perennials weren't up yet, the annuals barely a dream in the future. Everybody's very happy right now and growing strongly and well. |
|
- Posted by soccer_dad (My Page) on Sun, May 11, 08 at 13:47
| And don't skimp on one either. Get a good one. Stainless steel frames probably aren't necessary, but would be the envy of your neighbors. Look for openings that will flow the materiel your planning to broadcast, heavy duty frame and gear box, and pneumatic tires. Organic does not need to be precise - one reason I like it. Earthway, Lesco, and Spyker are all good brands. |
|
| Thanks everyone. It sounds like the rotary spreader is the clear favorite. I think Scott's is the main brand that I've seen, but one of the garden center carries a couple of different Earthway spreaders. Thanks! |
|
| I have the Scotts Speedy Green - the cheaper one - probably only holds 20-30 lbs of product. But I only spent about $20-25 on it - so I got what I paid for. One feature I wish I had was an edge guard. I spread milorganite mixed with coffee grounds last week, and when I swept the sidewalk, I just ended up pushing it to the sides, as the grass/soil was higher than the sidewalk. Plus I couldn't help but spread some into the street when doing that "strip" between the street and sidewalk. Not as big a deal as spreading a 39-0-0 mixture, but I'd still like to keep as many sources of N out of the watershed (Chesapeake Bay here) as possible. An edge guard is simply a flap that goes on the side of the spinning wheel, and blocks the "spray" of material. Note to self - may try taping a piece of cardboard to the side next time. Gags |
|
| To Gags - I think if you use a block on ONE side with a rotary spreader you are going to be dropping the same amount of fertilizer, but the "blocked" side will deposit it in a much small area, probably in a dense line adjacent to your blocking device = burn baby burn. |
|
| I've gone through 3 rotary spreaders. Each one was "better" than the last (more $$ too). Currently I have an AgriFab tow behind for a riding mower. My 2-cents? Buy cheap, use 2 seasons, toss! Why? Because I haven't been able to find a good one. To me good = one that works and lasts. The previous rotary (Scott"s) was ate-up by corrosion even with washing out after use. This season I've had to replace the trap door on the AgriFab and now I need to replace the sling-er. In both cases the "plastic" pieces died, they came apart in my hands - not good. Also the adjustment for the dump slot on the AgriFab is poor - it won't open smoothly, nor square and the adjustment goes up to 10. The 10 is a least 1/2" wide, what would I spread through a 1/2" slot? Chattahoochee stone?? I'd rather see the adjustable slot be up to 1/4", maybe a little over, have a Stainless Steel blade and adjust in 1/10" increments. cvt |
|
- Posted by brandyanna Idaho (My Page) on Sat, Apr 30, 11 at 22:16
| If I was to own only one spreader it would be a chest mount with a large opening. The beauty of this type is it is much easier to control throw for narrow areas as the drive is not determined by ground speed. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Organic Lawn Care Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.