|
Thu, Oct 1, 09 at 0:10
| I am trying to design a mist propagation bed using a timer turning on/off a pump bringing water from a container (rather than most systems with a timer turning a valve on/off from live water).
It will be a small system- I only need 2-4 mist heads. Most heads I have seen operate at approx 25 psi. The pipe length from pump to mist heads would not be any longer than 10 feet. The elevation change would be less than 4 feet. Can anyone help me figure out what kind of pump and size pipe I would need to work this? Kyle |
Follow-Up Postings:
|
| I don't have an answer for you, but I like your idea. My well water is bad and I can't use mister nozzles as they plug up very fast. With your system I could import enough good water to feed misters. Let us know how well it works. Al |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plant Propagation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.