JOIN NOW LOG IN
iVillage GardenWeb iVillage GardenWeb THE INTERNET'S GARDEN & HOME COMMUNITY ADVERTISEMENT
Blogs Forums Photo Galleries Ask The Experts Tools & Directories        
Return to the Rose Propagation Forum | Post a Follow-Up

 o
So far so good -- using method from FAQ

Posted by milieu_serene 8b (My Page) on
Sat, Jun 20, 09 at 23:05

I put a number of cuttings into a sand bed 2 weeks ago. Used Rootone powder and placed an Arizona mister (blue in color) on them 24 hours per day. They receive full sun through around lunch or early afternoon then are shaded from the afternoon sun.

This is the link to the FAQ http://faq.gardenweb.com/faq/lists/rosespro/2003063646004668.html

I have recently found some misters -- 0.8 GPH -- which are supposed to work on drip irrigation equipment. http://www.dripdepot.com/1163.html Other misting heads can be found here http://www.dripdepot.com/search.html?id=5Q69A3Ke

Because the AZ mister has only 2 mist heads which shoot out at 45 degree angles, I expect to stake 1/2 inch irrigation line in a rectangle around the sand bed, place the 0.8 GPH mister heads about 2 feet apart so that the cuttings will have the mist regardless of wind direction (the sand bed is on the edge of a field with no sides or top to block the wind).

Any other suggestions? I will let you know how it goes.


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Rose Propagation Forum
 
 


iVillage GardenWeb: The Internet's Garden & Home Community  
  iVillage Home & Garden Network