Return to the Square Foot Gardening Forum | Post a Follow-Up

 o
Composite Deck Raised Bed Designs

Posted by kbauer UT (My Page) on
Fri, Jan 22, 10 at 11:04

I saw on another member post a picture of a really nice raised bed using Composite decking. It was really well made but I would like to know how this person attached the corners of it? It almost looks as though they had used a 4x4 composite. If so, what did they use for attaching the side boards? The picture was posted by: sparks5478. I am hoping this person reads the Garden Web often and will help me out.


Follow-Up Postings:

 o
RE: Composite Deck Raised Bed Designs

I made raised beds out of composite deck boards. I used 1x 8s . I bought the regular deck screws. They are not supposed to rust. If you go to Lowes or Home Depot they will cut your boards for you. They are more expensive to build, but should last much longer than wooden boards and they look nice.

Scott


 o
RE: Composite Deck Raised Bed Designs

Glad I decided to go past page 1!

I went back into the archives and found a photo from when we (me, Mr. Sparks and the friend who's in the pic) built the planter. I THINK you're asking about the contrasting side trim, right? It's actually not a 4x4, but a board that was ripped to two different widths and attached to the corners from the inside, so it looked like a post. (You can see the cut pieces on the left.)

DSCN0673

We built the planter about 7 years ago and it still looks as good today as it did on day one. I've got the plans somewhere so if you're interested, let me know and I'll dig them up and scan them. They were from a Better Homes and Gardens special interest mag.

Looking back, my garden has come a long way. We were still battling the neighbors' bamboo and I was crossing my fingers that it wouldn't invade the planter because I was really, really tired of hacking up my backyard.


 o
RE: Composite Deck Raised Bed Designs

Mmmmmm.....very nice.

Damaged composite can often be sourced at H-D very cheaply.

I got about 12 16 ft. lengths for $5 apiece (normally about $35)


 o
RE: Composite Deck Raised Bed Designs

Wow! Those look fantastic. I hope the ones we're building come out as nicely. We are using composite lumber as well, but not decking material; instead we're using fascia board, which comes in much wider widths. I used 7.25" widths and stacked two 4x4 boxes on top of one another, joining them with a metal 8" mending plate in the center of each span. We're now waiting for it to warm up enough outside to be able to silicone the inside joints and caulk the outside joints. We're also adding a small one-piece corner molding to the corners, mainly because we didn't want to bother cutting miters for all eight boxes. Then we will paint out the whole thing (exterior only) with white paint.


 o
RE: Composite Deck Raised Bed Designs

HI sparks5478,
Very nice looking beds! Are these the 50/50 wood/plastic composite decking or trim? What is the height of each tier, and what board is the contrasting top flat rail? Is this a safe material for veg beds in that they wont leach toxic chemicals into the soil? Is looking for damaged boards at a discount the cheapest one can get or is there a cheaper source? Did you intentionally select this material due to its durability or did you just happen to have them from other projects?
Sorry i know too many ques, but I'd appreciate any one sharing their knowledge and experience as I am eager to make a decision and get started with the actual project.
TIA


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Square Foot Gardening Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here