I always hated getting that one back x-ray with the film. It always hurt. But I got through it. Now, they have digital x-rays. There is no film. It's a big plastic thing that has no give to it and hurts like heck. This thing made me cry. It was so painful. I could not even do it. And they kept trying and trying and it was cutting the bottom of my mouth. They made me feel really stupid and were very threatening because they said, well your insurance isn't going to cover it unless you take this x-ray. So here I am in the car crying and trying to find out if anybody else has this problem. Of course I should know by now that if I have a problem a lot of people have a problem. It's never just me. Has anyone experienced this digital x-ray bs? How do I get through this? I asked for a smaller one. they said they didn't have one. They only had one size. I said how can that be when everyone has different sized mouths?

I complained to GW. They wrote back to say it's been fixed and was never their intention, but if problem persists to let them know.

Heres what I am doing I removed my deck , you need a rubber bungie strap ,2 eyebolts with locknuts and washers, now with the dek off of the mower remove the blade break spring, next ensure the blade belt control lever swings freely,now insert one end of the bungie strap into the hole on the blade control lever(where the pto spring goes) now stretching the bungie cord (yes the blade control lever will engage) find a path clear of any moving belts ,pullys ect to the outside of the deck . Now find a flat spot and drill a hole for one of the eyebolts and install the eyebolt,now remove the S hook from the bungie cord and push the bungie cord through the eyebolt(again ensure that you have a clear path nothing will touch the bungie strap when the blades are turning) now find a spot on the foot rest (clear under and on top ) install the other eyebolt. now put the s hook back on the free end of the bungie cord and install the blade brake spring. Now if you hook the bungie cord to the eyebolt on the footrest the blades should activate and when you unhook the bungie cord the blade brake will engage stopping the blades.

Yes, this is from a brand new Firefox installation (83.0): The only thing I did, after opening it up and getting "Welcome to Firefox" page was go to https://www.gardenweb.com/discussions and click sign in. No adblocker, no extensions of any kind. A week or so ago I logged out to do a test and had problems getting logged back in on the gardenweb side. I was able to log into the houzz side. The only way I got back in was by copy cookies from another machine. Logging into a Windows machine on which I had been logged into gardenweb, I found I was no longer logged it and couldn't get back in. I don't use Windows much so gave up. A few days later I started Windows up to discover I was suddenly logged in without doing anything. I think it's because the techs are trying to juggle two domains, two sets of content pages, two sets of style sheets, one (or two?) user databases, and... whatever else. Personally, for now I wouldn't log out once you get logged in. (clearing cookies also logs you out)