|
Thu, Jul 19, 12 at 1:20
| here goes I bought a 1998 yard machine 402707 with a 42a707 briggs motor . when I got it some one put wrong ignition switch in it so replaced it got it cranking .would run 1/2 hr then cut off.
next problem no spark so I changed the ignition module same thing so I replaced alternator.same thing.today after changing altenator was running better then turned of after 20 minutes.no spark again .has new solinoid,key switch,module and alternator.fuse is fine.its starting to irratate me .any suggestions thanks |
Follow-Up Postings:
|
- Posted by kentuck_8b __ (My Page) on Thu, Jul 19, 12 at 21:24
| Take it to a 'yard machine 402707' dealer and have them fix it. |
|
- Posted by breenthumb z5upstateNY (My Page) on Fri, Jul 20, 12 at 1:51
| I had a car like that once. It would take me anywhere but I could never get home. Maybe the folks at the Tractor/yard machine Forums can help. Search, over there, might help too, while you're waiting for an answer. |
Here is a link that might be useful: tractors/yard stuff
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Test Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.