|
Tue, Oct 2, 12 at 5:47
| Hi! I'm installing bifold doors into a 72"w opening. Turns out the walls aren't plumb - the bottom is about 1.5" further out than the top of the wall. I'm using Johnson Hardware 1601 Series Folding Door Hardware instead of the more common "tracks". I'm trying to figure out if I should make the door casing plumb from top to bottom even though the bottom frame would protrude out 1.5" more than the top of the casing. OR....should I keep the door frame in line with the out-of-plumb wall. It seems like there's a logical answer here but, so far, I'm not getting it. Any ideas would be greatly appreciated!! THANKS! |
Follow-Up Postings:
|
- Posted by kentuck_8b __ (My Page) on Tue, Oct 2, 12 at 10:09
| If you are worried about looks, then I would install it in line with the out-of-plumb wall, otherwise it will look bad and be an eye-sore. Kt |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Test Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.