Return to the Vermicomposting Forum | Post a Follow-Up

 o
Should I be turning my bin?

Posted by machinist17 none (My Page) on
Sat, Oct 6, 12 at 12:28

So I have a hot outdoor compost pile that I turn regularly. But I've been under the impression you shouldn't turn your worm bin. i have a simple rubbermaid tote bin. Should I leave it be or turn it occasionally?


Follow-Up Postings:

 o
RE: Should I be turning my bin?

Leave it alone. Mostly. Worms don't like to be disturbed. They will be happier of you do not turn your bin. But I found that if I don't turn the bin, I get a bunch of compacted matted bedding at the bottom of the bin that never decomposes. This needs to be broken up and brought up to the surface. So I suggest you turn your bin once about half-way between setting up the bin and harvesting. So if it takes about 6 months to get to the point of harvesting, turn the bin one time about 3 months into the process.


 o
RE: Should I be turning my bin?

no. a good made worm bin should NEVER need turning.

only time you should turn your worm bin is if your having problems with air. if your having problems with air you made the bin wrong.

when i used to have a junk worm bin made out of a 5gallon bucket i had to turn it mainly because of lack of air due to the fact i piles the bucket which was a bad idea. as the worms only go to certain depths and you obviously don't want the bin to be too deep to the point the bottom gets no air and is not composting and becomes stink. the worms help aerate the bin as well by moving through it but they also need an air supply so you want your bedding loose for the most part not matted down.

when i make my bedding i use cardboard, news paper,w.e. carbon supply i got. i wet it down. fluff it up with my hands add a little old compost for the mircobes mix it it with my hands again with the carbon materials and put the food on then top with wet bedding again. never had any problems with this. i find my worms always at the surface but not crawling out it's that loose. eventually it will decompost and you can add more bedding later


 o
RE: Should I be turning my bin?

I have little experience with RM plastic bins, but I would not turn. By slowly top-feeding only, the "most done" stuff is at the bottom. So the worms stay near the top 8". Anything below that should have few worms and be ready to harvest. Simply put the top 8" or so of material aside and dump the rest into a pile. The top 8" goes back in the bin and then sort or sift the pile.

Mixing would cause the worms and food to be spread

I sometimes use a pitch fork to lift and fluff the bed and get some air in. But I do not mix.


 o
RE: Should I be turning my bin?

Being able to turn through all the material in the bin and see what is going on is the fun part of having a bin. I figure the most useful time to do this is about halfway through the compost time to mix in any larger materials that have not yet been enticed to decompose.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Vermicomposting Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here